--------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCK00000 Date: 08/15/96 From: HOLGER GRANHOLM Time: 11:02pm \/To: GEORGE DE BRUIN (Read 3 times) Subj: Finally Hello George, Since setting up FidoNet on my BBS on March 29 1995 (note the year) I have had this area set-up and now finally my HUB has got it ;-) Changed HUB in March this year and now I know how a really GOOD HUB operates. I can't imagine anything better! See you down the road, Holger * OLX 2.2 * Software independent: Won't work with ANY software. --- PCBoard (R) v15.22/M 2 * Origin: Coming to you from the Sunny Aland Islands. (2:20/228) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCL00000 Date: 08/16/96 From: RON BOISSONEAULT Time: 03:36am \/To: RICK WAKEFIELD (Read 4 times) Subj: Mail service. Hi Rick, I see my name here and I was just curious as to why? RW>06 Aug 96, Granzeau >> Boissoneault RW> PG> Would you remind me how to find the ASCII table once more? RW> Did my reply get lost to a part of the system or what - You saw it so I was just a bit tweaked. I really try to respond to every post I get and it left me wundering !! What is your opinion ? Gadzooks - When ya got a name like mine ya tend to notice it !! . Thought I sent that reply. Later--RON. * SLMR 2.1a * I quit my job and plugged the coffee pot in the computer --- Alexi/Mail+SF-Quick 1.20 * Origin: Space Coast REACT BBS, v34, Melbourne FL 407-255-9069 (1:374/710) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCQ00000 Date: 08/19/96 From: IRVIN HALL Time: 12:00am \/To: ALL (Read 3 times) Subj: Macro Help: I am trying to write a macro for key F11. Let me explain. I write messages using Bluewave and Qedit v2.1. After I reply to a message, I have to hit Esc,return, file,escape This saves the message and returns me to Bluewave. I have tried using the above commands at F11 with Macrobegin and then the commands spaced properly. * enhanced keyboard only f11 MacroBegin Escape Return File Escape f12 Then I save Qconfig.dat and run Qconfig, Keys, Save. For some reason the F11 does not do what it is suppose to. Where am I going wrong?? I have also set the enhanced Keyboard on in my Qedit. Thanks Irvin ... Don't play "stupid" with me... I'm better at it. ___ Blue Wave/DOS v2.30 [NR] --- Maximus 2.02 * Origin: The KAWARTHA Connection, Omemee ON, Can. 705-799-1160 (1:253/2) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCQ00001 Date: 08/19/96 From: JUSTIN HAWKINS Time: 05:22am \/To: ALL (Read 3 times) Subj: Why no OS/2 shareware? Why is it that Semware release DOS shareware versions of their software, but not OS/2 versions? - Justin (jhawkins@hal9000.net.au) ... Your E-mail is being assimilated. --- Blue Wave/Max v2.30 * Origin: Computer Connection - Aust - (+618) 326 2388 (3:800/809.0) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCQ00002 Date: 08/18/96 From: CEES SCHOUTEN Time: 03:12pm \/To: STEVE STEFFLER (Read 3 times) Subj: Qpack10.uc2 * Reply to a message in black_diamond_cees. It was some sunny day and I was way behind with the mail when I first found out that Steve Steffler wrote on Thu, 08 Aug at 11:48 to Cees Schouten about 'Qpack10.uc2': Hi Steve! SS> Sorry this isn't in netmail, btw, I don't know your address.. You could have tried the logfile! SS> Hello Cees, you tried FREQing QPACK10.Uc2 (the Qedit macro SS> collection I've accumulated) from my system the other day, and the SS> request failed. I've rectified that, and the filerequest will work SS> for you now. It's not a very large file, should only take you about SS> 3-4 minutes. Yeah, got it by now. Finally.... next time I hope to find things on the Internet, that's a lot cheaper. -= CU around sometime =- Ceessie ceessie@worldaccess.nl ... Dit bericht is voor elk IQ geschikt! --- timEd/2 1.10+ * Origin: AnimalWorld HQ 058-2661254 ZYX / ISDN (2:2802/23) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCR00000 Date: 08/21/96 From: STU TURK Time: 10:51pm \/To: IRVIN HALL (Read 3 times) Subj: Macro IH> f11 MacroBegin Escape Return File Escape IH> f12 IH> Then I save Qconfig.dat and run Qconfig, Keys, Save. IH> For some reason the F11 does not do what it is suppose to. IH> Where am I going wrong?? I have also set the enhanced Keyboard on IH> in my Qedit. IH> Thanks I would think that the last one, setting enhanced keyboard to On, would have been the most obvious one. Did you go back and check to make sure that it is still on? Just in case you accidentally selected Exit instead of Save... --- timEd/386 1.10+ * Origin: SoundProof Point, Pittsburgh PA (1:129/26.2) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCR00001 Date: 08/20/96 From: GERRY MILLER Time: 08:30pm \/To: IRVIN HALL (Read 3 times) Subj: Macro Yo Irvin! Monday August 19 1996 00:00, Irvin Hall wrote to All: IH> Help: IH> I am trying to write a macro for key F11. IH> Let me explain. I write messages using Bluewave and Qedit v2.1. IH> After I reply to a message, I have to hit Esc,return, file,escape IH> This saves the message and returns me to Bluewave. IH> I have tried using the above commands at F11 with Macrobegin IH> and then the commands spaced properly. IH> * enhanced keyboard only IH> f11 MacroBegin Escape Return File Escape IH> f12 IH> Then I save Qconfig.dat and run Qconfig, Keys, Save. IH> For some reason the F11 does not do what it is suppose to. IH> Where am I going wrong?? I have also set the enhanced Keyboard on IH> in my Qedit. I don't believe the problem you are experiencing is the fault of QEdit. I use OLX as my mail reader/writer and QEdit v3.0 as my editor. I think your solution *may* be within your configuration file for BlueWave where you define the editor... Try: Editor=Qedit @REPLY.MSG If that doesn't solve your dilemma, another alternative *could* be: f11 EditFile 'REPLY.MSG' Return (or whatever you call your message reply) within QCONFIG.DAT. Use of "Escape" within your QCONFIG.DAT file is not a valid command. I would recommend that you create a macro while within QEdit, save/write the macro to a file. THEN USE QMAC.EXE to convert the binary macro to ASCII format, then you will see the proper format to use when you want to modify the QCONFIG.DAT file. If you do not have QMAC.EXE, then the aforementioned technique will be of little use to you. Gerry ... REALITY.SYS corrupted Reboot universe? (Y/N/Q) --- GoldED/386 2.50 UNREG * Origin: It's Miller Time! (1:342/1.3) --------------- FIDO MESSAGE AREA==> TOPIC: 152 QEDIT Ref: DCU00000 Date: 08/13/96 From: GEORGE DE BRUIN Time: 10:45am \/To: PHIL POCOCK (Read 3 times) Subj: Question! > George, I hope that I'm not violating any rules by asking this question in > the QEdit echo, but I can't find another more fitting one. This is the best place... > Question is: Can you tell me if it's too late to upgrade my TSE 2.0 to a > later version. I received a flyer last year for TSE Pro v2.5, but failed > to act on it, and I've not been keeping up with the versions. The current product is still TSE Pro 2.5. Yes, you can still act on the upgrade pricing. George J. De Bruin SemWare Technical Support ------------------------------------------------------------------------------ SemWare Corporation Phone: (770) 641-9002 FAX: (770) 640-6213 WEB: http://www.semware.com FTP: ftp.semware.com george.de.bruin@semware.com ------------------------------------------------------------------------------ -- SPEED 2.0h #10: --- PCBoard (R) v15.22/M 10 * Origin: SemWare Support BBS * 770-641-8968 * (1:133/314)