--------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00008 Date: 02/20/97 From: JERRY MYER Time: 06:38am \/To: STAN BIMSON (Read 3 times) Subj: CNC MACHINE QUESTION > Jerry, are you seeing any messages in this echo? I saw this one... --- FLAME v1.1 * Origin: The Manufacturing Technology BBS! // 210-821-6356 (1:387/783) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00009 Date: 02/19/97 From: JAN BOSLAND Time: 07:51pm \/To: STAN BIMSON (Read 3 times) Subj: this echo 16 Feb 97, Stan Bimson of 1:116/32 wrote to anyone SB> I have not seen a message here since the 4th of Feb. If you SB> read this please send a short reply, Hi! (Short enough? ;-) CU on screen Jan j.bosland@dosgg.nl FIDO-adres 2:500/153.6628 --- MBM v4.10e * Origin: MBM v3 Turbo Vision? En ik heb een bril...8-) (2:500/153.6628) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00010 Date: 02/19/97 From: ROBERT SCHULZ Time: 10:06pm \/To: STAN BIMSON (Read 3 times) Subj: this echo Gegrt seist Du, o edler Stan! SB> I have not seen a message here since the 4th of Feb. If you read this SB> please send a short reply, I did! In Berlin, Germany! Date: 19th of February --- GoldED/386 * Origin: noman's land +49-30-41777132 (2:2411/413.7) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00011 Date: 02/23/97 From: STAN BIMSON Time: 10:02am \/To: ANYONE (Read 3 times) Subj: this echo following up a message from Stan Bimson to anyone: Area: AutoCAD Echo From : Harold Burton : Texas Hot Air! * Flower Mound, TX (1:124/8057) From : KURT MILLER : Exec-PC BBS > World's Largest BBS (414-789-4360) < (1:154/280) From : Lucien Carrier : Luca SBE! (514)466-6904 Lemoyne (Qc) v34 (1:167/820) From : Bob Westerman : Politically Incorrect (412) 766-0743 (1:129/283) From : Jerry Myer : The Manufacturing Technology BBS! // 210-821-6356 (1:387/783) From : Ian Underwood : A well connected point, even if I do say it from (2:253/417.3) From : Dirk Cap : BBS Coming Out! 32-3-366.50.59 (2:292/8014) From : Wilson Fu : Julian Laboratory / Taiwan / 886-2-632-7425 (6:720/150) From : Vincent Kaye : <* Silver Bullet *> DeLand FL * 8 Years on Fido (FIDONET 1:3618/113) From : Jan Bosland : MBM v3 Turbo Vision? En ik heb een bril...8-) (2:500/153.6628) From : Robert Schulz : noman's land +49-30-41777132 (2:2411/413.7) It is a pleasure to see that this echo is so widely distributed and that some of the old time folks are still connected. All these messages have given me a good set of seen bys to update my EList segment. I want to thank ALL that have replied. [shb] shb@32.collage.isdn.net stan.bimson@nashville.com --- timEd-B11 * Origin: CAD/Engineering Services BBS (615)822-2539 Fido/PCGnet (1:116/32) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2U00000 Date: 02/23/97 From: DON BACH Time: 07:23pm \/To: STAN BIMSON (Read 3 times) Subj: this echo SB> I have not seen a message here since the 4th of Feb. If SB> you read this please send a short reply, Message received here. Maybe we need a new release of Acad to stir things . Don --- Maximus 3.01 * Origin: No Regrets, Clinton, MS (601)924-8247 9P-5A (1:3632/65) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2V00000 Date: 02/23/97 From: CLEVE BOUTWELL Time: 07:22pm \/To: ALL (Read 3 times) Subj: video card for ACADv10 Can anyone help me find a video card which will work with Acad version 10 with a high-resolution monitor ? And if so, are there suitable drivers around for it ? * SLMR 2.1a * --- PCBoard (R) v15.22/M 5 * Origin: Riverdale, Ga (1:133/9024) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2W00000 Date: 02/26/97 From: STAN BIMSON Time: 04:42pm \/To: CLEVE BOUTWELL (Read 3 times) Subj: video card for ACADv10 Cleve Boutwell wrote in a message to All: CB> Can anyone help me find a video card which will work with CB> Acad version 10 with a high-resolution monitor ? And if so, CB> are there suitable drivers around for it ? Trident 8900. I don't know if the r10 drivers are still on the disk or not. I have them on my bbs. All of Trident drivers will run dual screen, if you got an old monochrome text or graphics card you can run it with no graphics screen command line and get a full screen of text on the monochrome. Card does well even with a 17" monitor. And the card is cheap. [shb] shb@32.collage.isdn.net stan.bimson@nashville.com --- timEd-B11 * Origin: CAD/Engineering Services BBS (615)822-2539 Fido/PCGnet (1:116/32) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E3100000 Date: 03/01/97 From: STAN BIMSON Time: 12:07am \/To: ALL (Read 3 times) Subj: A_CAD message echo Echo Tag: A_CAD Description: International AutoCAD/CAD Conference An echo for users of Autodesk's AutoCAD(tm), for the discussion of any aspect of this PC based CAD software. Utilities, third party software, both commercial and shareware, tips, tricks and programming of menus, font or shape files, LISP and scripts have all been talked about. All levels of users abound. Advertisements of products by vendors of any type or personal ads to sell software or hardware are NOT welcome. Users may discuss their use of any CAD related software/hardware product or service. Many other CAD applications have been discussed and are considered on topic. Rule File: A_CAD.RUL International AutoCAD/CAD Conference 04/03/91 Updated: 02/27/92 o The main topic of this echo conference is AutoCAD(tm) and the use of it, add on products like third party or shareware software, required hardware, utilities, tips, tricks and programming of any facet of ACAD. Other CAD or PC CAD is also open for discussion. o Advertisements of products or services by vendors of any type or personal ads to sell software or hardware are NOT welcome. o File listings are highly frowned upon but new file announcements that would benefit "the topic" will be permitted, within reason. o Product or Service announcements fall under advertisements and are not allowed. The one, and only one exception will be official "Update" announcements from Autodesk about AutoCAD(tm). o Foul or harsh language is not tolerable and will not be accepted. If you don't like what someone has to say for personal reasons, send them a reply using netmail - not echomail. o Some echoes allow aliases, but I tend not to want them. I think most of the professionals here want to KNOW who they are dealing with. I prefer full names used in the echo. o This conference is not bound by FidoNet, it's open to any network and system that wish to carry the conference. Messages in this conference should confirm with the FTSC (FidoNet Technical Standards Committee) format and must contain a tear and origin line. The tear line may not be longer than 35 characters including the --- characters. The origin line must fit on one 80 character wide CRT including the " # Origin: " text. o Eight-bit ASCII is not allowed in this conference. All characters in displayed message data (text/header) must be in the range 32 to 126, which rules out control characters. Control character can be shown as ^@ through ^_ for 0 to 31 or any character can be noted as . o Offline readers abound and offer system callers an excellent way of reading and replying to messages. These readers need to be configured to compile with the rule (above) on 8 bit ASCII characters. Make sure that your reader is configured to compile with FidoNet's standards (in all respects). o First rule of any echo is leave the moderating to the moderator. I am the moderator, if you have a problem with someone, tell me about it, don't post flames, etc. in the conference. I will take whatever appropriate action I see fit. o Treat others as you wish to be treated yourself. Last Rule: Don't be annoying nor be easily annoyed. A_CAD Moderator: Stan Bimson Fidonet 1:116/32 RBBSnet 8:967/108 PCGnet 9:518/332 --- MsgPost 1.1 * Origin: Moderator's Monthly Post (1:116/32) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E3300000 Date: 03/03/97 From: ANTONIO REMEZ Time: 02:29am \/To: STAN BIMSON (Read 3 times) Subj: A_CAD message echo Hello Stan! Saturday March 01 1997 00:07, Stan Bimson wrote to All: SB>> Last Rule: Don't be annoying nor be easily annoyed. The rules don't apply, if you ain't got "NO" visitors...There is something wrong here! I have seen some stupid messages on this echo, it makes feel guilty that I am a MASTER of AutoCad...:(... Antonio --- Stupid is Forever! * Origin: <* Silver Bullet *> Suck the Tip and it Explodes(FIDONET 1:3618/113) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E3300001 Date: 03/01/97 From: IAN UNDERWOOD Time: 04:10pm \/To: CLEVE BOUTWELL (Read 3 times) Subj: video card for ACADv10 Hello Cleve, 23-Feb-97 19:22:00, Cleve Boutwell did write to All Subject: video card for ACADv10 CB> Can anyone help me find a video card which will work with Acad CB> version 10 with a high-resolution monitor ? And if so, are CB> there suitable drivers around for it ? You mean higher than 1024 x 768 All the normal cards like Trident 8900d, S3 cards and Cyrus Logic work fine with the standard drivers (not answering your query so much as wondering what you want :-) Why Ver 10? - the move to 12 (Dos) was painless (ok more redundant 3d & rendering stuff but much improved bHatching and text editing) -=> _*:Ian:*_ >=- --- Terminate 4.10a47/Pro*at On test:- _Ter400_+Termail+Terpgp * Origin: (HighLander BBS is DEAD) - long live 2:235/9.3 (2:253/9.3)