--------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2M00001 Date: 02/17/97 From: HAROLD BURTON Time: 10:31am \/To: STAN BIMSON (Read 3 times) Subj: this echo SB> please send a short reply, I look in this echo daily and read whatever shows up in it. It has been slow lately, but all my BBS downloads seem to have diminished lately. SB> thanks, SB> [shb] SB> moderator, A_CAD echo SB> -!- timEd-B11 SB> ! Origin: CAD/Engineering Services BBS (615)822-2539 Fido/PCGnet SB> (1:116/32) ___ Blue Wave/QWK v2.20 --- ViaMAIL!/WC4 v1.30b * Origin: Texas Hot Air! * Flower Mound, TX (1:124/8057) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2N00000 Date: 02/17/97 From: LUCIEN CARRIER Time: 12:36pm \/To: STAN BIMSON (Read 3 times) Subj: this echo Bonjour Stan, Le 16 Feb 1997 [18:32], Stan Bimson crivait ceci anyone... SB> I have not seen a message here since the 4th of Feb. If you read SB> this please send a short reply, You are still read here Lemoyne (Qubec), a city near to Montreal. :-) Prochaine, lucien.carrier@qcmedia.com --- timEd/2 1.10+ * Origin: Luca SBE! (514)466-6904 Lemoyne (Qc) v34 (1:167/820) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00000 Date: 02/17/97 From: BOB WESTERMAN Time: 05:49pm \/To: STAN BIMSON (Read 3 times) Subj: this echo SB> I have not seen a message here since the 4th of Feb. If you SB> read this please send a short reply, Replying. I haven't gotten any replies to my last few messages, but then they were quite a while ago. Anyone around here using ACAD 12 Dos with SoftDesk Civil/Survey? I know there was one person for a while but I haven't seen anything from him in a while. Later, Bob --- timEd/2-B11 * Origin: Politically Incorrect (412) 766-0743 (1:129/283) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00001 Date: 02/18/97 From: JERRY MYER Time: 06:45am \/To: STAN BIMSON (Read 5 times) Subj: THIS ECHO a short reply --- FLAME v1.1 * Origin: The Manufacturing Technology BBS! // 210-821-6356 (1:387/783) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00002 Date: 02/18/97 From: IAN UNDERWOOD Time: 10:32pm \/To: STAN BIMSON (Read 5 times) Subj: this echo Hello Stan, 16-Feb-97 18:32:42, Stan Bimson did write to anyone Subject: this echo SB> ... since the 4th of Feb.If you read this please send a short reply, It's been a shadow of it's normal self but never quite ran dry ;-) (Bit of a :*sad*: message coming from the moderator!) -=> Ian >=- --- Terminate 4.10a44/Pro*at On test:- _Ter400_+Termail+Terpgp * Origin: A well connected point, even if I do say it from (2:253/417.3) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00003 Date: 02/19/97 From: DIRK CAP Time: 08:02pm \/To: STAN BIMSON (Read 3 times) Subj: Re: this echo -=> Quoting Stan Bimson to anyone on 16 Feb 97 13:32:42 <=- SB> I have not seen a message here since the 4th of Feb. If you read this SB> please send a short reply, SB> thanks, SB> [shb] SB> moderator, A_CAD echo SB> ! Origin: CAD/Engineering Services BBS (615)822-2539 Fido/PCGnet SB> (1:116/32) Hoy Stan, I am dirk from Belgium. I read the messages since a long time. In a profesional way i work with autocad sometimes. This system is configurated in a proper way so i have no questions. Reading messages from another person can be very interesting. I learn a lot from other men about several way's not only autocad. greetings Dirk ... Nothing outlasts Data! His OS still runs. --- BBS 32-3-3665059 * Origin: BBS Coming Out! 32-3-366.50.59 (2:292/8014) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00004 Date: 02/21/97 From: WILSON FU Time: 02:15am \/To: STAN BIMSON (Read 3 times) Subj: this echo SB> I have not seen a message here since the 4th of Feb. If you SB> read this please send a short reply, I can read this message here in Taiwan. :) -+- OLMS 2.53 UNREG --- Julian Lab / BBSNI 0.42(author) * Origin: Julian Laboratory / Taiwan / 886-2-632-7425 (6:720/150) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00005 Date: 02/20/97 From: VINCENT KAYE Time: 10:46pm \/To: ALL (Read 3 times) Subj: Who is using WHAT? Hello All! I used AutoCAD 10 & 12 for DOS and AutoCAD 12 & 13 for windows and, also, AutoCAD 2.52...It was my first LOVE in 1986...and it does NOT need a mathco processor...:)...It's fast on a 486SLC 33mhz, w/o a mathco. When I started using it it was on 8088 4mhz XT and it took over half an hour to regenerate St. Paul's Cathedral drawing...now it's 20 seconds...(w/o a mathco). Vincent --- BT 2.60/QuickBBS2.81/JMail2.81 * Origin: <* Silver Bullet *> DeLand FL * 8 Years on Fido (FIDONET 1:3618/113) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00006 Date: 02/20/97 From: VINCENT KAYE Time: 10:33pm \/To: WOLFGANG SUCKERT (Read 3 times) Subj: problems with win\95 Hello Wolfgang! Monday January 27 1997 23:15, Wolfgang Suckert wrote to All: WS>> Hi ... I am kind of new to autocad, have r12 for dos and it worked WS>> very well for me. I loaded windows 95 into my computor and now I WS>> cannot get autocad to run. I get... fatal error null pointer ... WS>> can't remember the last word but it began with an "r". Sure hope someone WS>> can help? What you need is AutoCad 12 for Windows and that is different than the one for Dos. Vincent --- BT 2.60/QuickBBS2.81/JMail2.81 * Origin: <* Silver Bullet *> DeLand FL * 8 Years on Fido (FIDONET 1:3618/113) --------------- FIDO MESSAGE AREA==> TOPIC: 146 AUTOCAD Ref: E2T00007 Date: 02/20/97 From: JERRY MYER Time: 06:33am \/To: STAN BIMSON (Read 3 times) Subj: CNC MACHINE QUESTION > Jerry, are you seeing any messages in this echo? > > > [shb] > shb@32.collage.isdn.net > stan.bimson@nashville.com Yes, Stan I even responded to you earlier. Traffic is slow, however. --- FLAME v1.1 * Origin: The Manufacturing Technology BBS! // 210-821-6356 (1:387/783)