--------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200008Date: 03/28/98 From: NEIL MARCUS Time: 05:40pm \/To: RICK COLLINS (Read 4 times) Subj: V.90 question? NM>> Does anyone know if there are any class 2 or 2.0 Faxes on V.90? RC> Of course not. V.90 isn't a "FAX" protocol. You're kidding! And all this time I thought it was! 8-)8-)8-) > What you _really_ want to ask is "do any V.90 modems > support Class 2 or Class 2.0 for faxing". That's exactly what I did ask. Oh I did leave the word "modem" out after "V.90" but I didn't think I was being graded on this one! 8-)8-)8-)8-) > And the answer to that is "yes". Thanks! Now would you also happen to know which manufactures have the combination of a V.90 MODEM and either a 2 or 2.0 fax??? > No, you can't receive a fax with them at 56K speeds. Of course, that goes without saying! THANKS!!!!!! > !!!!!!!!!! NEIL !!!!!!!!!! < --- GEcho 1.11+ * Origin: After all is said and done, more is said than done. (1:135/366) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200009Date: 03/29/98 From: DAVID BOWERMAN Time: 08:12am \/To: NEIL MARCUS (Read 4 times) Subj: V.90 question? Neil Marcus wrote in a message to Rick Collins: NM> Thanks! Now would you also happen to know which manufactures have NM> the combination of a V.90 MODEM and either a 2 or 2.0 fax??? USR/3Com -- V.90 and Class 2.0 Rockwell -- V.90 and Class 2 Regards, David --- timEd/2 1.10+ * Origin: Frog Hollow -- a scenic backroad off the Infobahn (1:153/290) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200010Date: 03/29/98 From: WES NEWELL Time: 01:12pm \/To: JOHN RANGER (Read 4 times) Subj: HOLDING a Connection when a receiver is 13:12:1603/29/98 JR> Yes...I DO know there are litle devices out there but JR> then they sometimes kil the lights and also cost $$$ so JR> a paramiter that can be put in is waaaay smarter that JR> suggesting I open my wallet for whats not there alreay. Run the line into the modem first, then back out to the phones. That way the modem controls the line and leaves the phones with an open circuit while the modem is in use. IOW, take the line straight into the LINE input of the modem. Then take the PHONE output of the modem back to the other phones. The only cost might be for a dual Jack where the modem is if you want it to look nice. Otherwise, just splice the wires. --- Maximus/2 3.01 * Origin: Wylie Connection 128K ISDN / V34+ 972-429-7005 (1:124/7028) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200011Date: 03/29/98 From: FANE Time: 06:02pm \/To: ALL (Read 4 times) Subj: Speed up Kermit Is there a way to speed up the Kermit protocol so it uses at least half the capability of a 28.8 kbps modem? 1:170/170.0 fane@f170.n170.z1.fidonet.org +1 918 455 5806 -- Fax --- {Mnemonic Oubliette} --- * Origin: Point System, +1 918 455 5806, Broken Arrow, OK, U.S.A. 1:170/170) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200012Date: 03/29/98 From: RICK COLLINS Time: 11:09am \/To: NEIL MARCUS (Read 4 times) Subj: V.90 question? At 17:40/28/Mar, Neil Marcus (1:135/366) said: ==================================== NM> Thanks! Now would you also happen to know which manufactures have the NM> combination of a V.90 MODEM and either a 2 or 2.0 fax??? Just about every one has either 1.0, 2 or 2.0. If they had Fax in the V.34 versions, they have it in the V.90 versions. There are no exceptions to that as far as I know. Rick --- Msged 4.00 * Origin: The Warlock's Cave, Ottawa ON (1:163/215.39) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200013Date: 03/29/98 From: LAWRENCE R. MINTZ Time: 08:48am \/To: NEIL MARCUS (Read 4 times) Subj: V.90 question? NM> Thanks! Now would you also happen to know which NM> manufactures have the combination of a V.90 MODEM and NM> either a 2 or 2.0 fax??? US Robotics modems (formerly known as Sportsters) and 3Com Courier (formerly known as USR Courier) V.everything modems support version 2.0 faxing as well as V.90 for data. Larry --- RA/Pro 2.50 * Origin: Mintz BBS, Silver Spring, MD (1:109/493) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200014Date: 03/31/98 From: NEIL MARCUS Time: 08:48pm \/To: RICK COLLINS (Read 4 times) Subj: V.90 question? > At 17:40/28/Mar, Neil Marcus (1:135/366) said: > ==================================== > NM> Thanks! Now would you also happen to know which manufactures have the > NM> combination of a V.90 MODEM and either a 2 or 2.0 fax??? > Just about every one has either 1.0, 2 or 2.0. If they had > Fax in the V.34 versions, they have it in the V.90 > versions. Ah, but there is the rub Rick, I don't want a class 1 or 1.0 modem, that's why I asked SPECIFICALLY which brand had those SPECIFIC classes of fax capabilities on the brand spanking new V.90 (data) modems. That's as opposed to the old 56Kflex OR the X-2 56K modems. I probably could have delved into my mags, gotten on the internet and visited various manufaturers sites, OR go run around to Computer City, CompUSA, Best Buy, Etc to get the info. Instead I posted here, hoping to save myself a lot of personal research. THANKS!!!!!! > !!!!!!!!!! NEIL !!!!!!!!!! < --- GEcho 1.11+ * Origin: After all is said and done, more is said than done. (1:135/366) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200015Date: 04/02/98 From: CRAIG FORD Time: 12:40am \/To: NEIL MARCUS (Read 4 times) Subj: V.90 question? Neil Marcus wrote the following to Rick Collins, and I quote (in part): > Just about every one has either 1.0, 2 or 2.0. If they had > Fax in the V.34 versions, they have it in the V.90 > versions. NM> Ah, but there is the rub Rick, I don't want a class 1 or 1.0 modem, NM> that's why I asked SPECIFICALLY which brand had those SPECIFIC NM> classes of fax capabilities on the brand spanking new V.90 (data) NM> modems. That's as opposed to the old 56Kflex OR the X-2 56K NM> modems. Just about all of the new V.90 modems based on Rockwell and Lucent firmware will implement Class 1.0. 3COM modems will implement Casses 1, and 2.0. NM> I probably could have delved into my mags, gotten on the internet NM> and visited various manufaturers sites, OR go run around to NM> Computer City, CompUSA, Best Buy, Etc to get the info. Instead I NM> posted here, hoping to save myself a lot of personal research. Somebody's got to do it. :-) Let us know what you find. Regards.... Craig aka: cford@ix.netcom.com : craig.ford@2001.conchbbs.com --- timEd/2 1.10+ * Origin: Dayze of Futures Past * V.Everything * 281-458-0237 * (1:106/2001) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4200016Date: 04/01/98 From: RON HARPER Time: 09:25pm \/To: ALL (Read 4 times) Subj: Please help me out here Hi All, You may have already descused this issue I don't know, but I was wanting to know if it is possible to run a 56k modem through Dos & how good it'll work if it'll work. Any advice is appreciated. Thanks, Ron Harper --- Platinum Xpress/Win/Wildcat5! v2.0 * Origin: The NeverEnding BBS/Deltona,FL/407-860-7720/bbs.never (1:3618/555) --------------- FIDO MESSAGE AREA==> TOPIC: 105 HIGH SPEED MODEM Ref: F4300000Date: 04/02/98 From: CRAIG FORD Time: 06:11pm \/To: LAWRENCE MINTZ (Read 4 times) Subj: V.90 question? Lawrence Mintz wrote the following to Craig Ford, and I quote (in part): -=> Note: Copied from HS_MODEMS by WIMM/2 1.31 > Just about all of the new V.90 modems based on Rockwell and > Lucent firmware will implement Class 1.0. 3COM modems will > implement Casses 1, and 2.0. LM> Did you mean that the Rockwell and Lucent firmware modems would LM> implement class 1, class 2 or class 2.0. No. LM> To the best of my knowledge, no one refers to class 1 as class 1.0. They are not the same. Class 1.0 is slightly different from Class 1. Regards.... Craig aka: cford@ix.netcom.com : craig.ford@2001.conchbbs.com --- timEd/2 1.10+ * Origin: Dayze of Futures Past * V.Everything * 281-458-0237 * (1:106/2001)