TN>--------------------- TN>if errorlevel 42 event1 TN>if errorlevel 99 event2 Trent This actually should NOT work the way you've designed it...when you design batch file errorlevels you MUST put the higher errorlevels BEFORE the lower...this is a function of DOS batch file design...not RyBBS. So the correct setup would be: if errorlevel 99 event2 if errorlevel 42 event1. Greg --- SLMR 2.1a On a clear disk you can seek forever --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCKR1872 Date: 08/16/95 From: TRENT NAUMANN Time: 10:31pm \/To: GREG RYAN (Co-Sysop)(Rcvd) (Read 7 times) Subj: R: Events Thanks for clearing that up Greg, my mistake. Actually, right now I'm doing only one errorlevel check, so it's not a problem for me, but other users would like this info I'm sure. --------------- >>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<< FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCI00002 Date: 08/13/95 From: GREG RYAN (Co-Sysop) Time: 08:34am \/To: JIM HENRY (Read 9 times) Subj: msg base problem JH> I seem to have discovered a bug in RyBBS's ability to handle 500 JH> message bases, currently the true limit may be 256. I currently carry JH> 315 echoes/message bases and here is what the problem is: JH>A caller logs on and get to the new message scan. JH>All mail to the caller is flagged as it should be. Thanks Jim!...i believe i've found that one because of your very thorough information..much appreciated ...new alpha today! Greg --- SLMR 2.1a All wiyht. Rho sritched mg kegtops awound? --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCJ00000 Date: 08/08/95 From: DAVE HASSLER Time: 05:41pm \/To: TRENT NAUMANN (Rcvd) (Read 8 times) Subj: Events TN> Dave - All I can do is tell you how I have my events TN> set up, and they work. Your setup in events.bbs is fine, TN> Hope that helps. Trent. TN> --- * Origin: Exec-PC BBS > World's Largest BBS (414-789-4360) TN> < (1:154/280) Thanks, Trent. Actually, that helps alot. --- cPoint v2.17/FreeWare * Origin: The VolleyBoard 503.228.6533 PDX, USA (1:105/290.35) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCK00000 Date: 08/15/95 From: JIM HENRY Time: 09:09pm \/To: GREG RYAN (Co-Sysop)(Rcvd) (Read 7 times) Subj: msg base problem GR>Thanks Jim!...i believe i've found that one because of your very GR>thorough information..much appreciated GR>...new alpha today! GR>Greg GR>--- You're quite welcome. This problem seems to be fixed in the latest alpha. -Jim- --- SLMR 2.1a Kato Kaolin - PROOF that Ginger slept with Gilligan! --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCN00000 Date: 08/18/95 From: TOM OLLMANN Time: 07:53pm \/To: TRENT NAUMANN (Rcvd) (Read 9 times) Subj: NEW FILES SCAN TN>Hi - TN> I have a question for anyone else using RyBBS, and perhaps a bug (o TN>no!) report for greg. TN> The problem is that my system locks up quite a bit when people sele TN>the new users scan. Does this happen to anyone else? I'm using the TN>single-node version 8.0. TN> Also, Greg, as a suggestion (from many of my users). Make the new TN>files scan start from the last date the user selected the new files scan TN>(as it works on EXEC-PC), instead of the last date the user logged on. TN>The reason is that most users do not check the file section every time TN>they log on. Just a suggestion for new versions. TN> TN>--- TN> * Origin: Exec-PC BBS > World's Largest BBS (414-789-4360) < (1:154/280 TN> I get the same problem with the new files scan. It only happens once in a while and I have not been successful in getting rid of it. Tom --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCT01596 Date: 08/24/95 From: TRENT NAUMANN Time: 12:26am \/To: TOM OLLMANN (Read 5 times) Subj: R: NEW FILES SCAN Thanks for your reply Tom. An interesting addition is that I called RyBBS Homebase a few weeks ago, and was able to reproduce the same error on Greg's system. Any ideas on what's causing this and how to fix it Greg? --------------- >>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<< FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCN00001 Date: 08/18/95 From: TOM OLLMANN Time: 07:53pm \/To: GREG RYAN (Co-Sysop)(Rcvd) (Read 7 times) Subj: NEW FILES SCAN TN>Hi - TN> I have a question for anyone else using RyBBS, and perhaps a bug (o TN>no!) report for greg. TN> The problem is that my system locks up quite a bit when people sele TN>the new users scan. Does this happen to anyone else? I'm using the TN>single-node version 8.0. TN> Also, Greg, as a suggestion (from many of my users). Make the new TN>files scan start from the last date the user selected the new files scan TN>(as it works on EXEC-PC), instead of the last date the user logged on. TN>The reason is that most users do not check the file section every time TN>they log on. Just a suggestion for new versions. TN> TN>--- TN> * Origin: Exec-PC BBS > World's Largest BBS (414-789-4360) < (1:154/280 TN> I get the same problem with the new files scan. It only happens once in a while and I have not been successful in getting rid of it. Tom --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CCR00000 Date: 08/17/95 From: JIM HENRY Time: 04:50pm \/To: ALL (Read 7 times) Subj: BBS<>Internet mail This message was from JIM HENRY to ALL, originally in conference Internet and was forwarded to you by JIM HENRY. ------------------------- I run a BBS and I already offer internet email through a Fidonet<>Internet gateway. I also run an Internet access door that offers callers SLIP access to the Internet. I ALSO have a registered domain name, airpower.com. Here is what I need to do but have no idea how: I want to be able to pick up email from my ISP addressed to any of my callers at airpower.com. This is not as simple as me logging on with a browser with an email helper application (at least I don't think it is). I don't want my callers to have to log on and go through the internet door to get their own mail; many callers don't have a clue how to do this. I want the BBS to retrieve it for them and have it available for ALL callers whether or not they use the Internet door. My first approach was to have my ISP configure a pointer to re-route mail coming in to "username@airpower.com" to "username@f408.n273.z1.fidonet.org" but message turnaround time is very important to me and this slows things down and leaves me vulnerable to the (sometimes) unreliable fido<>uucp gate. I want to get away from this and retrieve the mail myself and assume I need some kind of software to work with my bbs and mailer to do so. BTW my setup runs under Desqview/x, not MS Windows so I can't use a Windows specific app to do this. Can anyone help? Thanks. -Jim- --- SLMR 2.1a Kato Kaolin - PROOF that Ginger slept with Gilligan! --- SLMR 2.1a H. Ross Perot: Folksy billionaire or Ferengi in disguise? --- RyPacker v2.5 * Origin: AirPower Home of the AIRGUN Echo 610-259-2193 (1:273/408)