--------------------------------------------------------------------------- THEY'RE BAAAAACKKK!!!.... Rymult 8.06 fossil s s --- SLMR 2.1a --T-A+G-L-I+N-E--+M-E-A+S-U-R+I-N-G+--G-A+U-G-E-- --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CAB00004 Date: 06/05/95 From: JIM HENRY Time: 06:59pm \/To: SYSOP (Read 7 times) Subj: error 103 =========================================================================== BBS: AirPower Information Systems Date: 06-02-95 (22:22) Number: 182 From: JIM HENRY Refer#: NONE To: ALL Recvd: NO Subj: Error 103's Conf: (11) RYBBSOP --------------------------------------------------------------------------- Is anyone else getting the Error 103's? They happen after a caller does their qwk upload. I have qwkpath specified in startup.bbs Jim --- --- SLMR 2.1a If this were an actual tagline, it would be funny. --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CAB00005 Date: 06/05/95 From: JIM HENRY Time: 07:01pm \/To: SYSOP (Read 7 times) Subj: internodal chat =========================================================================== BBS: AirPower Information Systems Date: 05-23-95 (15:12) Number: 169 From: JIM HENRY Refer#: NONE To: GREG RYAN Recvd: NO Subj: .. Conf: (11) RYBBSOP --------------------------------------------------------------------------- GR> GR>if you have the "node" command doens't that allow for you got 'call' GR>them? GR>i'll check into that and see what can be done GR>Greg GR>--- No. It should but it doesn't. Jim --- SLMR 2.1a Unable to locate Coffee -- Operator Halted! --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CAB00006 Date: 06/05/95 From: JIM HENRY Time: 07:02pm \/To: SYSOP (Read 7 times) Subj: rules =========================================================================== BBS: AirPower Information Systems Date: 05-10-95 (15:54) Number: 151 From: JIM HENRY Refer#: NONE To: ALL Recvd: NO Subj: rules Conf: (11) RYBBSOP --------------------------------------------------------------------------- Rules for the RYBBSOP echo: Any post about the RYBBS software will be considered on topic. Any post about related software meant to be used in conjunction with the RYBBS program, such as but not limited to Rypacker, QWKMail , various front end/mailer programs, BBS doors, etc. will also be conbsidered on topic. Periodically various software authors may post notices of their wares PROVIDED they are known to work with the RYBBS software. As with most other echoes, flaming and personal attacks will not be allowed and you will be directed to take such to netmail with the parties involved. Handles are discouraged in the RYBBSOP echo. Please tell us your real name! If a situation arises where it becomes necessary to comment on a message's format or content, please leave that to the moderator. Things we have seen discussed in other echos include excessive quoting, spelling errors, indentation of the left margin, problems with the origin line, etc. You will not see these things discussed openly; they are handled via netmail to the appropriate sysop, when necessary. It is a violation of the echo rules to remind another participant that they are in violation of the echo rules. Leave it to the moderator. Finally, the moderator strongly agrees with Mark Twain when he said: "Everything in moderation, ESPECIALLY moderation! Sysop: as this echo is added to your system, you are asked to leave a message in the echo indicating you're now carrying it, so that we may get some idea of where the echo is going. Jim Henry, Moderator, AirPower Information Systems, 1:273/408, (610) 259-2193 --- SLMR 2.1a It's only a hobby ... only a hobby ... only a --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CAB00007 Date: 06/05/95 From: JIM HENRY Time: 07:03pm \/To: SYSOP (Read 7 times) Subj: auto ryboards =========================================================================== BBS: AirPower Information Systems Date: 05-20-95 (18:01) Number: 165 From: JIM HENRY Refer#: NONE To: ALL Recvd: NO Subj: auto ryboards? Conf: (11) RYBBSOP --------------------------------------------------------------------------- I've just upgraded my system to a 90 mhz Pentium with 1.3 gigabyte drive and now that space and speed are not a problem, I am expanding my bbs from approximately 120 echoes to about 500. As I have spent mucho time writing my new ryboards.bbs file lately, it occurred to me that it sure would be nice if someone could right a program to automate some of this. Some typical lines in my ryboards.bbs look like this: 1,5, General,c:\rybbs\boards\$gen,FILEANDRECEIPT 2,5, Airguns,c:\rybbs\boards\airgun,echo,c:\netmail\conmail\airgun 3,5, NRA NEWS,c:\rybbs\boards\NRA_NEWS 4,5, Palmtops,c:\rybbs\boards\palmtops,echo,c:\netmail\conmail\palmtops 5,5, Email,c:\rybbs\boards\email1,FILEANDRECEIPT 6,5, Paintball!,c:\rybbs\boards\paintbal,echo,c:\netmail\conmail\paintbal 8,5, Local Politics,c:\rybbs\boards\poly273,echo,c:\netmail\conmail\poly273 9,5, Hunters' Advocate,c:\rybbs\boards\hunt_adv,echo,c:\netmail\conmail\hunt_a 10,5, Paul Revere Net,c:\rybbs\boards\pr_net,echo,c:\netmail\conmail\pr_net,17 12,5/95, PR_NET News,c:\rybbs\boards\prn_news,echo,c:\netmail\conmail\prn_news 14,5, Cops,NRA,& RKBA,c:\rybbs\boards\NRA_COPS,echo,c:\netmail\conmail\NRA_COP 20,5, 12_STEPS,c:\rybbs\boards\12_steps,echo,c:\netmail\conmail\12_STEPS 22,5, 60S_70S_PROGROCK,c:\rybbs\boards\60s_70s,echo,c:\netmail\conmail\60s_70s 24,5, ABLED The lines are actually longer than you can see here, at least for the non-zone one echoes, so you can see how time consuming this is. And of course then when I'm all done I have to write new Rypacker config files and a Squish.cfg too, for all these echoes. Sure would be nice if one could just enter some basic path info, your z:net/node address for non zone 1 echoes, and either type in or read in the Area names, and have it generate a Ryboards.bbs and a Rypacker.cfg, or at least the heart of it. Well I can hope, can't I? Jim --- --- SLMR 2.1a Press any key to continue or any other key to quit --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: CAB00008 Date: 06/05/95 From: JIM HENRY Time: 07:04pm \/To: SYSOP (Read 7 times) Subj: internodal chat =========================================================================== BBS: AirPower Information Systems Date: 05-20-95 (18:10) Number: 166 From: JIM HENRY Refer#: NONE To: GREG RYAN Recvd: NO Subj: Internodal chat Conf: (11) RYBBSOP