--------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00003 Date: 03/30/95 From: GREG RYAN (Co-Sysop) Time: 07:40am \/To: JIM HENRY (Read 5 times) Subj: new beta available JH>I'm curious why you are running Rymult 8.04b? my bbs is downstairs in the basement and although i've been modifying the program i've not gone down and updated the program... JH>I'm running 8.04e without too much trouble but I have been having problems JH>in my local net (273) and nnone of my mail is getting out. I wanted to JH>mention that there is still a problem with chat. It works ok IF people on JH>each node go into cha But they have no way of knowing that someone else JH>{[N1] Jim Henry} Hi there JH>{[N2] John Doe} Hello! good idea...i'll see what i can do. greg JH>I am also having intermittent "Error #103" when callers use qwk. I feel JH>this is probably something with my setup or memory allocation and not Ry, error 103 is 'probably' a ry error...what's the exact address? greg --- SLMR 2.1a On a clear disk you can seek forever --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00004 Date: 03/30/95 From: GREG RYAN (Co-Sysop) Time: 07:42am \/To: MICHEL VAILLANCOURT (Read 6 times) Subj: System freezes MV> Nope, I haven't seen that here. I have 4 or five bulletins MV> currently. MV> Anyone know if Greg still reads this echo? I sent a few bug MV> reports and have heard NADA back from him... yup...i actually have it on two seperate systems...but i'm so busy these days and much more accessable via the internet greg@execpc.com greg --- SLMR 2.1a All wiyht. Rho sritched mg kegtops awound? --- RyPacker v2.7 * Origin: RyBBS HomeBase `Home of RyBBS!' (414)-962-1098 (1:154/333) --------------- FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00005 Date: 03/29/95 From: JIM HENRY Time: 01:47pm \/To: MITCH ROSENBERG (Read 8 times) Subj: qwkmail Mitch, Download qwkmail5.zip and/or qwkml280.zip. I forget which is newer. The newer one has some improvements over the older one but may be oredifficult to run under Rymult. Regards, Jim --- Squish v1.01 * Origin: AirPower Information Systems PRNet/Pa(610) 259-2193 (1:273/408) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^E1130 Date: 03/31/95 From: GREG RYAN (Co-Sysop) Time: 10:18am \/To: JIM HENRY (Read 4 times) Subj: R: qwkmail JH>Mitch, JH> Download qwkmail5.zip and/or qwkml280.zip. I forget which is newer. JH>The newer one has some improvements over the older one but may be JH>oredifficult to run under Rymult. JH>Regards, JH>Jim JH>--- Squish v1.01 JH> * Origin: AirPower Information Systems PRNet/Pa(610) 259-2193 (1:273/40 Jim are you using that program or are you using Ry's internal qwk system? Greg --------------- >>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<< FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00006 Date: 03/29/95 From: MITCH ROSENBERG Time: 01:16pm \/To: ALL (Read 7 times) Subj: Help Extracting QWK Does anybody out there extract QWK packs from their own RyBBS so that they can answer mail with an offline reader? (Greg, nothing personal about your message editor, I would just like to use my offline reader as I do with all the other echos I participate in). If so, how do you extract the QWK, & how do you reload your REP pack? Thanks in advance, Mitch --- SLMR 2.0 The_Key to CyberSpace (215) 879-3836 :Matrix File Search --- RyPacker v2.7b * Origin: AirPower, Home of the AIRGUN Echo..(610)259-2193 (1:273/408) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^E1089 Date: 03/31/95 From: GREG RYAN (Co-Sysop) Time: 10:18am \/To: MITCH ROSENBERG (Read 4 times) Subj: R: Help Extracting QWK MR>Does anybody out there extract QWK packs from their own RyBBS so that MR>they can answer mail with an offline reader? MR> (Greg, nothing personal about your message editor, I would MR> just like to use my offline reader as I do with all the other MR> echos I participate in). .. actually i almost always use a QWK reader myself Greg --------------- >>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<< FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00007 Date: 03/29/95 From: JIM HENRY Time: 01:59pm \/To: ALL (Read 7 times) Subj: Rybbs list Does anyone have any idea how many Rybbs installations are out there? Greg? Anyone? It seems we only have about a half a dozen sysops who seem to post in this echo, but that doesn't mean much, I realize. Would anyone consider putting together a Ry-specific BBS list? I believe there are one or two on Greg's board and they are YEARS out of date. --- SLMR 2.1a If at first you don't succeed.....call it version 1.0 --- RyPacker v2.7b * Origin: AirPower, Home of the AIRGUN Echo..(610)259-2193 (1:273/408) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^E1046 Date: 03/31/95 From: GREG RYAN (Co-Sysop) Time: 10:17am \/To: JIM HENRY (Read 4 times) Subj: R: Rybbs list JH>Does anyone have any idea how many Rybbs installations are out there? JH>Greg? Anyone? It seems we only have about a half a dozen sysops who JH>seem to post in this echo, but that doesn't mean much, I realize. JH> Would anyone consider putting together a Ry-specific BBS list? JH>I believe there are one or two on Greg's board and they are YEARS out of JH>date. .. I'd say there's about 100 or so public boards...however i don't know their names/numbers. Most people don't contact me once they get the software package.. Greg --------------- >>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<< FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^00008 Date: 03/29/95 From: JIM HENRY Time: 02:54pm \/To: GREG RYAN (Co-Sysop)(Rcvd) (Read 7 times) Subj: Rymult problem Greg, On one of my recent logons to your board I mentioned a few problems I was having. Here is another, though I think it is a memeory thingie and not a Rybug. Perhaps you or someone else cand advise me though. I run 2 nodes. On node 1 Binkley runs as a front end, and calls up RyMult node 1 when it detects a bbs caller. On node 2 Rymult node 2 runs stand-alone. After the setup runs for a while I start to have problems in node 2 with the message length. It should be 180 lines as it is in node 1 and that is what startup.bbs, .1, and .2 are set for. After a few callers the message length shortens to much less, like 5 to 20 lines (it varies). If you read, reply to, or write messages online on node 2 this is what you are reduced to. I'm not sure if qwk is affected. The only cure is a complete re-boot. This problem has been recurring for several versions so I'm sure it's not a Rymult problem . Any ideas how I can stop this? Does anyone else have this happen? Jim --- SLMR 2.1a NR] RAM DISK is not an installation procedure --- RyPacker v2.7b * Origin: AirPower, Home of the AIRGUN Echo..(610)259-2193 (1:273/408) --------------- ** A related thread FOLLOWS this message. FIDO MESSAGE AREA==> TOPIC: 256 RYBBS Ref: C3^E0714 Date: 03/31/95 From: GREG RYAN (Co-Sysop) Time: 10:11am \/To: JIM HENRY (Read 5 times) Subj: R: Rymult problem JH>Greg, JH> On one of my recent logons to your board I mentioned a few problems I JH> was having. Here is another, though I think it is a memeory thingie JH> and not a Rybug. Perhaps you or someone else cand advise me though. JH> I run 2 nodes. On node 1 Binkley runs as a front end, and calls up JH> RyMult node 1 when it detects a bbs caller. On node 2 Rymult node 2 JH> runs stand-alone. After the setup runs for a while I start to have JH> problems in node 2 with the message length. It should be 180 lines as JH> it is in node 1 and that is what startup.bbs, .1, and .2 are set for. JH> After a few callers the message length shortens to much less, like 5 JH> to 20 lines (it varies). If you read, reply to, or write messages JH> online on node 2 this is what you are reduced to. I'm not sure if qwk JH> is affected. The only cure is a complete re-boot. This problem has JH> been recurring for several versions so I'm sure it's not a Rymult JH> problem . Any ideas how I can stop this? Does anyone else have this JH> happen? ... hmmm...i've not seen this...i take it you're running under a multi-tasker and not a network? Greg