WV> |------------------|about qmpro/olx WV>Did you set YOUR paths in the "Config" "Files" path definitions or did WV>you leave the standard paths intact? I believe you left the latter. WV>ill Thanks for the reply William, I believe I have finally found the secret? When one uses both Qmpro and Olx as one integral package as Mustang sells it, the tendency is to forget that both are configurable. Therefore they have to at least correspond with each other..Mercy..mercy I have racked my brain, and though old and low on oxygen I didn't realize how dead it was...Tnx agn for your gracious response..Perhaps I have finally put it into a state of cooperation.. N OM HNY -+- OLMS 2.53p UNREG --- * Origin: Killarney Narrows * Milton, WV * (1:262/31) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3B00001 Date: 03/05/96 From: ALLEN HANEY Time: 08:30pm \/To: RUSS DERRY (Read 7 times) Subj: qmpro/olx =========================================================================== Packet: NARROWS Date: 03-02-96 (02:44) Number: 156 From: RUSS DERRY Refer#: NONE To: ALLAN HANEY Recvd: NO Subj: qmpro/olx Conf: (70) FIDO: Qmodem --------------------------------------------------------------------------- RD> >AH> follows.. QWK_in = c:\qmpro\olxdown\ RD> >AH> rep = c:\qmpro\upload\ RD> >AH> Work Dir = c:\qmpro\olx\ RD> >AH> I invariably receive QWK packets in c:\qmpro\download RD> >AH> and on uploading a Rep packet, I have to insert the RD> >AH> olx\ between c:\qmpro\upload RD> >AH> ie: olx\ Russ my OLX dir options are now set as above, as well I have set Qmpro dir options are also identical to the above as revised... My biggest problem all along, and I have had it long enough to make it work perfectly, is I lost sight of the fact that each program although they are intended to enhance one another but they are not seamless..:) RD> I have all my upload paths the same C:\qmpro\upload and olx is not RD>in any of them. Works for me. Or you can do as the other fellow RD>suggested and use one dir or path for everything, I would not find that RD>very logical for the way I use my comm. package but a lot of folks do RD>it that way. RD> Hope this helps. Russ It certainly has helped and I'm grateful for your response, sometimes we need are proverbial senses, redirected...Funny thing is when plying my trade (in a younger age) I was considered by many to an excellent and logical trouble shooter...hehehe Oh well...Pooooor Me..... God Bless and tnx agn... N OM HNY -+- OLMS 2.53p UNREG --- * Origin: Killarney Narrows * Milton, WV * (1:262/31) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3B00002 Date: 03/05/96 From: DAVID M. WHITE Time: 03:46pm \/To: ALL (Read 7 times) Subj: Qmodem Question Can anyone tell me if Qmodem Pro is Windows compatible and does it come with an off line mail reader built in?? If not, does anyone know of a comm program that does include a mail reader? Dave in Tucson ___ X SLMR 2.1a X Bill Clinton-what he*is* speaks louder than what he says! --- Maximus/2 2.02 * Origin: Old Pueblo BBS Tucson Computer Society (1:300/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3B00003 Date: 03/05/96 From: CAREY BLOODWORTH Time: 10:10pm \/To: MICHAEL KELLEY (Read 7 times) Subj: FOLDERS IN OLX MK>folder name. There is a choice to select a folder, but when I click on MK>it, no folder names come up. Yet, when I read the directory of You need to set the 'active' folders from the View / Save list option on the menu. --- QScan/PCB v1.17b / 01-0162 * Origin: Jackalope Junction 501-785-5381 Ft Smith AR (1:3822/1) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3C00000 Date: 03/06/96 From: ALAN LAY Time: 01:01pm \/To: KENT ANDERSON (Read 7 times) Subj: Zoom RPI Problem with QM KA>A friend has two problems: A Zoom RPI modem with V.32bis, and a KA>Packard Bell 486SX computer. She is using Qmodem 4.6TD. When she dials KA>in to a BBS, the phone directory refuses to leave the screen when a KA>connect is made. The BBS menus pass by at the bottom of the directory KA>screen. I have tried every change in setting I can think of to delete KA>this problem, but it will not go away. I once experienced this same problem. I made no successful configuration changes to cure it. I just deleted the entire program, and then re-installed it. The problem never appeared again. --- * OLX 1.53 * I'm working on my 2nd $million... Gave up on the 1st. * --- FidoPCB v1.5 beta-'j' * Origin: Lunatic Fringe * Richardson,TX * 214-235-5288 * (1:124/2113) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3C00001 Date: 03/07/96 From: RUSS DERRY Time: 12:45am \/To: DAVID M. WHITE (Read 7 times) Subj: Qmodem Question To: DAVID M. WHITE Subject: Qmodem Question >Can anyone tell me if Qmodem Pro is Windows compatible and does it come >with an off line mail reader built in?? If not, does anyone know of a Dave, QmodemPro 1.53 for DOS has OLX with it. They also make a Qmodem Pro for Windows but have not used it but would think it would come with OLX. I have used Qmodem 4.60 TD, Qmodem 5.01 and now QmodemPro 1.53 and find all of them very good programs. Mustang was/is/could be still selling Qmodem 5.01 for $20.00 shipped and it came with OLX, the olx is a crippled version but does do most of what a person wants. It will not let ;you attach files but it is a very good off line reader and you get both for 20.00. Mustangs order line is 1-800-999-9619 and they can fill you in on about anything you would want to know. Hope this helps Russ --- * QMPro 1.53 * All hope abandon, ye who enter messages here. * Origin: A.O.P.C.U.G. BBS : 501-452-5417 (1:3822/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3C00002 Date: 03/07/96 From: RUSS DERRY Time: 12:48am \/To: GARY HOLLANDER (Read 7 times) Subj: File attachments To: GARY HOLLANDER Subject: File attachments GH>I use the Qmodem commercial version 5.01 with OLX 2.2. It does **not** >have an ATTACH botton. 5.01 comes with the share ware version of OLX is why. As far as I know you done your file attachment the only way you can and that is directly while on the BBS you are using. Hope this helps Russ --- * QMPro 1.53 * Answering dumb questions is easier than fixing dumb mista * Origin: A.O.P.C.U.G. BBS : 501-452-5417 (1:3822/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3C00003 Date: 03/07/96 From: FRED JOHNSON Time: 01:00pm \/To: DAVID M. WHITE (Read 7 times) Subj: Qmodem Question DMW>Can anyone tell me if Qmodem Pro is Windows compatible and does it come DMW>with an off line mail reader built in?? If not, does anyone know of a DMW>comm program that does include a mail reader? Dave, Qmodem Pro for DOS, has a mail reader called OLX. It also will run in Windows or Windows 95. I got the Windows 95 version, but use the DOS version and SLMR mail reader. One or the reasions I use the DOS ver., because of Scripts. The scripts or easer to work with, and can do more than the Windows' ver. I can send my mail to a "\MAIL" dir insterd on the download dir. I hope this will help you. Later... Fred * SLMR 2.1 * .... 4 out of 5 people make up 80% of the population! --- PCBoard (R) v15.22/M 2 * Origin: The French Quarter 504-891-1388 Fido:1:396/44 (1:396/44) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: D3D00000 Date: 03/08/96 From: WILLIAM VITAL Time: 07:27pm \/To: ALLEN HANEY (Read 7 times) Subj: qmpro/olx