---------------

FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER   Ref: CGA00000 Date: 12/04/95
From: KEN GORLEY                                            Time: 04:13pm
\/To: SEAN FINN                                           (Read 7 times)
Subj: Help!Qmpro-DOS/WIN95

-=> Quoting Sean Finn to All <=-
 SF> Greetings:
 SF> I am having a great deal of trouble running Qmpro 1.53 (DOS)
 SF> under Windows 95.  I get as far as Qmpro loading, getting to the
 SF> terminal screen, and then when it tries to initialize the modem it
 SF> craps out.  Normally under DOS I would see:
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> |QmodemPro 1.53 Compiled 09/12/94                           
 SF> |
 SF> |Copyright (C) 1992,94 Mustang Software, Inc.               
 SF> |
 SF> |                                                           
 SF> |
 SF> |You are now in TERMINAL mode                               
 SF> |
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> |ATZ            <== Initialize with settings in modems 
 SF> nvram.                 |
 SF> |OK                                                         
 SF> |
 SF> +-----------------------------------------------------------
 SF> -----------------+
 SF> Now, ATZ doesn't even echo onto the screen and the system
 SF> freezes. I have tried this in every mode.  (E.G.  "Do not recognize
 SF> Windows", Suggest Windows when necessary", "DOS mode", etc.).  I have
 SF> successfully run it in DOS mode but then I am unable to multitask,
 SF> etc..  I would very much like to run it from within Windows as a
 SF> background process (download in the background, etc.).  A brief
 SF> description of my system configuration follows: Also, I am alerted of
 SF> the problem when the session is suspended and Windows tells me there is
 SF> a conflict of Interrupt 4. 
 SF> IBM Microchannel PS/2 486-50
 SF> COM1=03F8 & IRQ 4
 SF> 16550 UART
 SF> USR HST 14.4 Courier v.42 external
 SF> Qmpro 1.53 for DOS
   My first suggestion would be to try Windows Hyperterminal.  If that does 
not
   work then I would move your modem to com 2. IRQ 3 and set up Qmpro for 
om2
   Irq 3. Because your problem sounds like a IRQ conflict.  I have used Qmpro 
153
   under windows 95 with no problems.  Except I could not download in the 
background
   toooooooo many CRC errors.  But it would work great when it was in the 
Front.
   Since you have a PS/2 I would assume that your mouse IRQ is redirected to
   IRQ 9 or 12 I cant remember which one.  So your mouse should not be a 
problem.
   Good Luck
   Ken
... "Bother" said Pooh as "Formatting Drive C" appeared on the screen
___ Blue Wave/386 v2.21 [NR]
--- Maximus/2 2.02
 * Origin: Tesla's Tower 5 BBS * Maximus WARP'd! (1:346/49)
---------------

FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER   Ref: CGA00001 Date: 12/05/95
From: GREG HORWITZ                                          Time: 12:54pm
\/To: ALL                                                 (Read 6 times)
Subj: Faxing With Qmpro

I'm having difficulty faxing out using qmpro.  Could it be my setup, or
should I use another fax program?  I'm using a IBM 80286 with 512 k of
mem.  That's all I can get on this ol baby.  Any suggestions?
Thanks, Greg
--- RBBSMail v18.2
 * Origin: The Spacedock Bbs (203) 666-4999 21.6K HST/DS (1:142/499.0)
---------------

FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER   Ref: CGB00000 Date: 12/04/95
From: MATTHEW VIDAS                                         Time: 08:58pm
\/To: DAN MILLER                                          (Read 7 times)
Subj: Re: ???

-> Utilities DL areas of your local boards for WATCHKT2.ZIP,
-> WATCHKAT.ZIP or WATCHCAT.ZIP.  All of these variations of this
-> utility include ASM
Thanks a lot, ill be sure and look for them :)
--- QScan/PCB v1.17b / 01-0556
 * Origin: Digital Horizons * Rochester, NY * 716-475-0658 (1:2613/251)
---------------

FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER   Ref: CGE00000 Date: 12/06/95
From: JOE ARMES                                             Time: 02:39pm
\/To: MIKE GLYNN                                          (Read 7 times)
Subj: Re: Qmodem version

Some gossip from "Joe's Place".  On 01 Dec 95  03:12:00, 
Mike Glynn yelled to All:
MG> Can somone tell me what is the difference if any of qmodempro for dos
MG> and Qmodem version 5.1.
MG> Is 5.1 the latest version.
MG> Thanx in advance!
MG> Mike
  I have never used the Window version, but from what I have been told it 
oes
not have an offline mail reader.
<Joe>
--- GEcho 1.00
 * Origin: Joe's Place * (410) 551-2839 * Severn, Maryland (1:261/1416)