--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG300025 Date: 11/24/95 From: JOHN BENNETT Time: 10:51am \/To: LYLE TAYLOR (Read 6 times) Subj: delete after send LT>Is there a way to automatically delete a mail pkt after a LT>successful ul? If so, how? This will do it: It's designed for the .QWK door in Wildcat BBS's. Just change the "waitfor" text and the name of the .rep packet. <------------------------------------------------------> DECLARE FUNCTION SENDMAIL CALL SENDMAIL timeout 60 FUNCTION SENDMAIL WAITFOR "QWK/REP menu command" if exists(ConfigUploadPath+"\wildcbbs.rep") then send "U" waitfor "now" if upload(ConfigUploadPath+"\wildcbbs.rep", Zmodem) = 0 then del ConfigUploadPath+"\wildcbbs.rep" end if waitfor "QWK/REP menu command" end if END FUNCTION john.bennett@mhmr.tx.state.us --- * CMPQwk #1.42* UNREGISTERED EVALUATION COPY --- QScan/WC v1.18b / 01-0564 * Origin: THE POST HOLE ALTO, TX 409-858-3480 (1:19/89) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG300026 Date: 11/30/95 From: MEL OLNEY Time: 10:22am \/To: CHARLES RAINE (Read 6 times) Subj: FAX PROBLEM Check your CR>documentation that came with your computer and select the Specific Modem CR>that is in your Computer. I doubt if you have a Generic 2400 baud modem CR>in your 486... If that is in fact what you have, I'm not surprised that CR>it doesn't support FAX.... Get a faster, more sophisticated modem if CR>you want to use it for FAX... Thanks for your reply; Maybe Santa will remember me and do something about that new modem. I got into the OPTIONS/DEVISES area and tried everything that looked remotely like it might work, even a couple of the Packard Bell ones. The P B manual was no help in this case. Then going on over to the Trouble shooting guide area in the Qmodem manual, I tried setting baud rate to 19200 and at least the modem initializes, and goes into wait. I have been busy, so have not done much with it since. --- * OLXWin 1.00a * Press "+" to see another tagline. --- QScan/PCB v1.17b / 01-0406 * Origin: Knight Moves BBS - Rochester, NY 716-865-2106 (1:2613/313) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG400000 Date: 11/28/95 From: DAN MILLER Time: 11:10pm \/To: MATTHEW VIDAS (Read 6 times) Subj: Re: ??? > I was wondering if theres a way i can make qmpro make a file every > time > i get a RING on my modem, and the time whoever called? or (this is a > little off topic) is there a file that i can use, like a TSR or > something that logs each RING and time? I'm not aware of a program that does this, but that doesn't necessarily mean there isn't one out there somewhere. *IF* you or a friend can handle ASM (assembly) code, look in the BBS Utilities DL areas of your local boards for WATCHKT2.ZIP, WATCHKAT.ZIP or WATCHCAT.ZIP. All of these variations of this utility include ASM source code containing the code for detecting and counting rings, which could be adapted to your needs. The package is a TSR whose function is to reboot a DOS system if the modem reports more than a specified number of rings without being told by a BBS program to answer the call or if certain other conditions are detected. It was written for the IBM Macor Assembler (MASM) but could easily be tweaked for Turbo Assembler (TASM) or others. Cheers ... --- RBBSMail v18.2 * Origin: The Spacedock Bbs (203) 666-4999 21.6K HST/DS (1:142/499.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG400001 Date: 11/30/95 From: ZIVAGO LEE Time: 09:10pm \/To: ALL (Read 6 times) Subj: Colors in qm95 Hi, Is there a way to change colors in QM95? The ANSI screens are really dark and can hardly see some colors at all.. I have it set to a black background screen... Thanks.. Zivago ... "Transporter chief , beam the landing party to the bridge" ___ Blue Wave/QWK v2.12 --- DB 1.39/004485 * Origin: The Diamond Bar BBS, San Dimas CA, 909-599-2088 (1:218/1001) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG400002 Date: 11/22/95 From: SEAN FINN Time: 05:01am \/To: ALL (Read 6 times) Subj: Help!Qmpro-DOS/WIN95 Greetings: I am having a great deal of trouble running Qmpro 1.53 (DOS) under Windows 95. I get as far as Qmpro loading, getting to the terminal screen, and then when it tries to initialize the modem it craps out. Normally under DOS I would see: QmodemPro 1.53 Compiled 09/12/94 Copyright (C) 1992,94 Mustang Software, Inc. You are now in TERMINAL mode ATZ <== Initialize with settings in modems nvram. OK Now, ATZ doesn't even echo onto the screen and the system freezes. I have tried this in every mode. (E.G. "Do not recognize Windows", Suggest Windows when necessary", "DOS mode", etc.). I have successfully run it in DOS mode but then I am unable to multitask, etc.. I would very much like to run it from within Windows as a background process (download in the background, etc.). A brief description of my system configuration follows: Also, I am alerted of the problem when the session is suspended and Windows tells me there is a conflict of Interrupt 4. IBM Microchannel PS/2 486-50 COM1=03F8 & IRQ 4 16550 UART USR HST 14.4 Courier v.42 external Qmpro 1.53 for DOS (My move to a 28.8 won't be soon enough) Many thanks for some tips on .INI fixes, etc.. Sean. ___ Blue Wave/QWK v2.12 --- PCBoard (R) v15.21/M 5 * Origin: Pc Prison - Middletown NY (1:272/60) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG400003 Date: 11/30/95 From: STEVEN WEBB Time: 02:43pm \/To: FRED HALL (Read 6 times) Subj: qmodem 95 Hello Fred! In a message to Steven Webb <11/28/95> Fred Hall wrote: FH> In a message to ALL , STEVEN WEBB said: SW>>Hello All! SW>>I just got Qmodem for win95 and i was wondering if there was a SW>>way of geting HS-Link protocol to work in it. FH> Nope...you can't interface any external protocols to QM95 at FH> the present time. FH> Fred -- fghall@borg.com -- powered by Win95 & Qmodem for FH> Win95 FH> ... Took an hour to bury the cat. Silly thing kept moving. FH> * Wave Rider 1.33 # 81 * FH> --- GEcho 1.11+ FH> * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) thanks that kinda sucks i like hs-link bye steve ... Platinum Xpress.... You know whats next! --- Platinum Xpress/Wildcat! v1.1 * Origin: NIVETS BBS : 407-932-0584 (1:3633/20) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG400004 Date: 11/30/95 From: GAYE LEVY Time: 07:48pm \/To: RAY SANDER (Read 6 times) Subj: Hangup Hi Ray... RS> I guess I worded it wrong, I think we are having the same thing RS>happening. I do get a NO CARRIER message from the BBS. Thats what I RS>meant when I said I disconnect, but the status bar says I am online as RS>well as if I close out of Qmodem without a manual hangup it will say I RS>am online. Yep. Same problem. I think it is modem specific since I just switched computers and modems. The notebook modem (Infotel> did not have this problem while the new computer (using my old Digicom Eagle Plus), appears to be staying "online". What kind of modem do you have? I am going to try the communications program that comes with Win95 to see if I can duplicate the problem. Gaye...in Bellevue, WA --- * OLXWin 1.00a * A day without sunshine is like a day in Seattle * Origin: Grey Matter : (206) 528-1941 (1:343/210) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG500000 Date: 11/30/95 From: PERISH ROTWOOD Time: 09:04am \/To: JIM DEFOE (Read 6 times) Subj: Scroll back JD-->I am using qmodem for DOS running under Win95. Do you know how I can set -->the scroll back to get more lines?? I did it once before but cannot figure -->out what I did to get it. I am getting about 50 lines and if I remember -->right I had it set for -->9999 lines. You need to go into your config menu, choose file preferences, and set scrollback lines for a maximum of 32000 lines. Perish * QMPro 1.53 * Spock: She's dead Jim, get off her. --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG500001 Date: 12/04/95 From: CHARLES RAINE Time: 10:15pm \/To: SEAN FINN (Read 6 times) Subj: Help!Qmpro-DOS/WIN95 To: SEAN FINN Subject: Help!Qmpro-DOS/WIN95 SF>Greetings: > I am having a great deal of trouble running Qmpro 1.53 (DOS) under >Windows 95. I get as far as Qmpro loading, getting to the terminal creen, >and then when it tries to initialize the modem it craps out. Normally >under DOS I would see: Sean: Did you ever try to run Qmpro 1.53 under Windows 3.1? If you did you would have had to setup a .PIF file definition and also would have had to change the specification of EMS and XMS memory utilization within QmPro. This could be your problem under Windows 95. Please feel free to contact me if you think I can be of some Help. I don't have Windows 95, but I do have QmPro & OLX working 100% under Windows 3.1. Charles Raine Internet: charles.raine@mwcs.mb.ca Phone: (204) 895-0940 charles_raine@mbnet.mb.ca --- QScan/PCB v1.17b / 01-0105 * Origin: 1:348/206 Muddy Waters 204-231-4507 (1:348/206)