--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00001 Date: 11/20/95 From: KEN ONWERE Time: 03:36am \/To: ALL (Read 6 times) Subj: How to permanently activate (and edit) W03:36:0111/20/95 How do I force Windows95 to show me a menu of options, at bootup ? In addition, How do I edit this boot menu ? Ken Onwere --- GEcho 1.11+ * Origin: Interamnia BBS * Claremont, CA * (909)624-2246 (1:218/502.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00002 Date: 11/22/95 From: MEL OLNEY Time: 03:11pm \/To: ALL (Read 6 times) Subj: FAX PROBLEM I received my QmPro for Windows yesterday, 11/21/95. This was the easiest installation I have ever done. Same for OLX for Windows. Just one problem. QmPro doesn't recognize my FAX modem. Did I choose the wrong modem during setup? I just picked Generic 2400 baud out of the list. Yes I'm still using the installed modem that came with my Packard Bell 486. The FAX never worked very well using another FAX program, but it did work after a fashion! QmPro doesn't even initialize. I am sending in the registration cards today so I can eventually get help from MSI but I'd like to get going now! Thanks in advance MEL --- * OLXWin 1.00a * Backup not found: (A)bort (R)etry (P)anic --- QScan/PCB v1.17b / 01-0406 * Origin: Knight Moves BBS - Rochester, NY 716-865-2106 (1:2613/313) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00003 Date: 11/22/95 From: RAY SANDER Time: 03:03pm \/To: ALL (Read 6 times) Subj: Hangup Hello All, I am using QModem Pro V2.0 for Windows 95. Been using it now since it came out and like most everything about it. One thing bugs me though and I can't seem to change this - When I disconnect from a BBS it never disconnects me from the connection. I always have to do a manual hangup after the BBS says *Offline*. Same thing with trying to close the program if you did not do a manual hangup it will say your still online are you sure you want to cancel. Has anyone a fix for this? Thanks -Ray- ray_sander@fitch.com --- CMPQwk #1.42 UNREGISTERED EVALUATION COPY * Origin: The Lore Board - Mt. Vernon, Ohio - 1:226/1330 (1:226/1330.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00004 Date: 11/22/95 From: BRUCE MCCORMACK Time: 12:27pm \/To: ZIVAGO LEE (Read 6 times) Subj: Mobyturbo in win95 ver.. ZL>Is there a way to enable Mobyturbo in Zmodem with Qmodem for Win95? I ZL>know it isn't an option but is there a way to use this? Thanks.. ZL>Zivago Open the phone directory and right click on the icon for the service that you wish to change, select properties, then transfer protocol. It will allow you to select different protocols. Hope this helps. Bruce CMPQwk 1.42 75 Hello darkness my old friend. I've come to dance with you again. --- PCBoard (R) v15.22/M 10 * Origin: Dixieland BBS / USR 14400 all lines (1:3611/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00005 Date: 11/22/95 From: PAIGE MILLER Time: 06:52am \/To: BRENT JOHNSON (Read 6 times) Subj: VT100 emulation? -=> Brent Johnson was overheard typing to All <=- BJ> Wondering if anyone here uses the VT100 emulation in Qmodem (DOS)? BJ> If you do could you drop me a line back in this echo. Thanks! Yes, I use VT100 emulation from QModem Pro 1.53 for DOS. Seems to work properly after I configured the keys more to my liking. The only thing is I have never been able to get Kermit to work from QModem Pro (but that doesn't have anything to do with VT100...) ... Danger, Brent Johnson! Off-topic messages! Danger! ___ Blue Wave/DOS v2.21 --- * KMail 3.10m Knight Moves --- QScan/PCB v1.17b / 01-0406 * Origin: Knight Moves BBS - Rochester, NY 716-865-2106 (1:2613/313) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00006 Date: 11/21/95 From: CHARLES RAINE Time: 10:24am \/To: BRENT JOHNSON (Read 6 times) Subj: VT100 emulation? >Wondering if anyone here uses the VT100 emulation in Qmodem (DOS)? If you d >could you drop me a line back in this echo. Thanks! I do... Why do you ask? Charles Raine Internet: charles.raine@mwcs.mb.ca Phone: (204) 895-0940 charles_raine@mbnet.mb.ca --- QScan/PCB v1.17b / 01-0105 * Origin: 1:348/206 Muddy Waters 204-231-4507 (1:348/206) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CFZ00007 Date: 11/23/95 From: ZIVAGO LEE Time: 02:21pm \/To: BRUCE MCCORMACK (Read 6 times) Subj: Re: mobyturbo in win95 ve -=> Quoting Bruce Mccormack to Zivago Lee <=- ZL>Is there a way to enable Mobyturbo in Zmodem with Qmodem for Win95? I ZL>know it isn't an option but is there a way to use this? Thanks.. ZL>Zivago BM> Open the phone directory and right click on the icon for the service BM> that you wish to change, select properties, then transfer protocol. It BM> will allow you to select different protocols. Hope this helps. This will let me select Zmodem but only CRC-32 not Mobyturbo. Also, is there a way to get HSLINK in QM95? Zivago ... "Transporter chief Mccormack, beam the landing party to the bridge" ___ Blue Wave/QWK v2.12 --- DB 1.39/004485 * Origin: The Diamond Bar BBS, San Dimas CA, 909-599-2088 (1:218/1001) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG100000 Date: 11/23/95 From: LYLE TAYLOR Time: 11:50pm \/To: ALL (Read 6 times) Subj: delete after send Is there a way to automatically delete a mail pkt after a successful ul? If so, how? L.M.T. ... If it's really tourist season, why can't we shoot them? --- Via Silver Xpress V4.3P SW12290 * Origin: Ducky's 605-393-9626 V.34 (1:293/643) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG100001 Date: 11/23/95 From: GAYE LEVY Time: 02:59pm \/To: RAY SANDER (Read 6 times) Subj: Hangup Hi Ray.... RS> I am using QModem Pro V2.0 for Windows 95. Been using it now RS>since it came out and like most everything about it. One thing bugs me RS>though and I can't seem to change this - When I disconnect from a BBS it RS>never disconnects me from the connection. Interesting. I have the opposite problem in that my connection is disconnected yet the status line at the bottom says "Online" and my script does not terminate. I wonder if our problems are related. MSI tech support did not have any suggestions to help me out other than put an END statement at the bottom of my script. Hope you get some help with your problem. I am still not sure I like QMPro for Win95 but time will tell. Gaye...in Bellevue, WA --- * OLXWin 1.00a * Seattle? They have computers in Seattle????? * Origin: Grey Matter : (206) 528-1941 (1:343/210) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CG200000 Date: 11/25/95 From: STEVEN WEBB Time: 10:10am \/To: ALL (Read 6 times) Subj: qmodem 95 Hello All! I just got Qmodem for win95 and i was wondering if there was a way of geting HS-Link protocol to work in it. thanks steven ... Power beyond the WILDest of CATS!...Platinum Xpress! --- Platinum Xpress/Wildcat! v1.1 * Origin: NIVETS BBS : 407-932-0584 (1:3633/20)