--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDJ00008 Date: 09/14/95 From: ANTHONY BAILEY Time: 12:21pm \/To: BOB SEABORN (Read 6 times) Subj: Qmpro dos 1/2 Thanks Bob, I was pretty sure they didn't have one, but I'll give this one a shot. I appreciate it. Perish --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDK00000 Date: 09/14/95 From: BOB SEABORN Time: 09:01am \/To: MARK DEWAR (Read 6 times) Subj: carrier detect > what is causing qmpro to give me the message > carrier detected send intialization to modem ? > i have changed modems twice now. > this is a 486dx4/100 with controller built on the motherboard. a wise > 28.8 k modem. the previous modem was a 14.4 maxtech. Is your software set up to monitor DTR, while the modem forces DTR on. That is the first explanation that comes to mind. .....Bob --- GEcho/32 v1.20/Pro * Origin: From the Keyboard of the Echo Moderator (1:140/12.1) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDL00000 Date: 09/15/95 From: PHIL MORRISON Time: 10:10am \/To: ALL (Read 6 times) Subj: Stepper Motors Point me to a basic text. tnx Phil Morrison, MD 209 Amity Drive Bristol, TN 37620 --- DB 1.58/004516 * Origin: Think and Reply 423-968-9237 H16 (1:3642/504) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDL00001 Date: 09/15/95 From: DICK SHINE Time: 07:02am \/To: LYLE TAYLOR (Read 6 times) Subj: Re: Qmodem Phone #? hugh baker... qmodem 5.01 including OLX is available from MSI for $20.00 total. this is a super deal and i am presently using it.dos,not windows. call 1-800-999-9619 ttyl..... richard dick.shine@cde.com --- QScan/PCB v1.17b / 01-0240 * Origin: Craig's DATA Exchange! BBS 904/483-2463 (1:3669/50) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDL00002 Date: 09/15/95 From: CHARLES RAINE Time: 08:11pm \/To: KENNETH GOSS (Read 6 times) Subj: Messages Hi Ken: I believe that the last time I successfully sent you a message was via this conference. I have been trying to send you messages via our internet gateway to fidonet as: Ken.Goss@f410.n350.z1.fidonet.org or Ken.Goss@f401.n350.z1.fidonet.org None of the messages I sent have been returned, so I assume that they must be correct or got lost.... By the way, my Sysop ended up sending me your attached Script file which you sent me. I think I have a solution to your problem, but do not want to send it via this public conference. Please contact me again with your wishes. Charles Raine Internet: charles.raine@mwcs.mb.ca Phone: (204) 895-0940 charles_raine@mbnet.mb.ca --- QScan/PCB v1.17b / 01-0105 * Origin: 1:348/206 Muddy Waters 204-231-4507 (1:348/206) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDM00000 Date: 09/12/95 From: FRED HALL Time: 03:31pm \/To: MEL MITTS (Read 6 times) Subj: QModemPro for Windows95 In a message to ALL , MEL MITTS said: MM>Hello out there in QModem Land! MM>Anyone using the new QModemPro for Windows95 (v2.0)? MM>Can you comment on the vicious rumor that it does NOT, I say again, doe MM>NOT include fax capabilities? I just got my package today...I can't find anywhere where it says you can FAX. Fred -- hallf@rl.af.mil -- powered by Win95 & Qmodem for Win95 ... Your proctologist called & your head is ready. * Wave Rider 1.33 # 81 * --- GEcho 1.11+ * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDM00001 Date: 09/13/95 From: FRED HALL Time: 03:31pm \/To: BOB RICHARDS (Read 6 times) Subj: Does Anyone Live In This In a message to Fred Hall, Bob Richards said: BR>How do I find out what init. string Telix is using...I must not be doin BR>it right in Qmodem, because I'm sure it was longer than AT^Z, when I BR>installed the program! It's gotta be in a setup or options menu choice somewhere...I'm not a Telix guy so I can't tell you for sure. FH>1) you should replace the Win3.1 COMM.DRV with something like WFXCOM FH>which allows better use of the 16550 UART. BR>The driver in my system.ini file is rhsicomm.drv. Have no idea if this BR>is a high speed driver, or not. Do you? That's a new one on me and I've heard of quite a few...what comm or fax app that you installed do you think it came from? FH>2) make sure you are using HARDWARE flow control, not XON/XOFF. FH>3) make sure your COM port speed is set to higher than 14.4K BR>Yes to both. BR>Any other suggestions? Yep...crosspost this to the WINDOWS echo...there's some sharp guys in there. Fred -- hallf@rl.af.mil -- powered by Win95 & Qmodem for Win95 ... Multitasking = screwing up several things at once. * Wave Rider 1.33 # 81 * --- GEcho 1.11+ * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDM00002 Date: 09/13/95 From: FRED HALL Time: 03:31pm \/To: BOB RICHARDS (Read 6 times) Subj: New Information on Proble In a message to Fred Hall, Bob Richards said: BR>"No room for new char in buffer" I assume that char is character.? BR>I don't know what this means, except for a literal reading, nor do I BR>know how to fix it (make the buffer larger?). I'm hoping that you do, BR>since you mentioned the Logging function!!! If your modem and/or serial port has a 16550 UART, there is a 16byte buffer used when transmitting and receiving info IF Windows has enabled it. IF the buffer is enabled the COMM driver can then use it to cut down on errors. Maybe that RHICOMM.DRV isn't set up right. Comment out that line with a semi-colon and replace it with COMM.DRV...see if an upload works then. Fred -- hallf@rl.af.mil -- powered by Win95 & Qmodem for Win95 ... Join the army, meet interesting people, kill them. * Wave Rider 1.33 # 81 * --- GEcho 1.11+ * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDM00003 Date: 09/13/95 From: FRED HALL Time: 03:31pm \/To: HUGH BAKER (Read 6 times) Subj: Qmodem Phone #? In a message to LEAH OWENS, HUGH BAKER said: HB>Do you have a phone number where I can reach the authors/supporters for HB>Qmodem? Also, do you happen to know the "GO" word to reach them on HB>Compuserve. I have Procomm Plus for Windows Ver 1, but I want to HB>upgrade and change software programs. I wonder if the latest Qmodem HB>has the features I am looking for? Mustang Software - 805-873-2500 Fred -- hallf@rl.af.mil -- powered by Win95 & Qmodem for Win95 ... I never make misstakes * Wave Rider 1.33 # 81 * --- GEcho 1.11+ * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDM00004 Date: 09/16/95 From: MEL MITTS Time: 09:11am \/To: PAUL CHAFFEE (Read 6 times) Subj: QModemPro for Windows95 PC> MM> Can you comment on the vicious rumor that it does NOT, I say again, PC> MM> does NOT include fax capabilities? PC>That is true. The reason is that you can use the Windows 95 fax software PC>and it will work the same. I guess I will have to 'play' with it for a few days and see. Thanks. Later... Mel ___ OLXWin 1.00a Please return stewardess to her original upright position. --- Silver Xpress Mail System 5.4H1 * Origin: The File Shop BBS - 40 Gigs Online - (913) 262-7000 (1:280/316)