--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDF00010 Date: 09/08/95 From: BOB RICHARDS Time: 10:09pm \/To: LEAH OWENS (Read 7 times) Subj: New Information on Proble Hi Leah, Here's a copy of my post to Charlie Rovner, which contains the new info I've come up with on my u/l problem. I'm hoping it will mean enough to you to allow you to suggest a fix! Hi Charlie, My reply to you was wrong! I've left part of the message here, so you'll know what I'm talking about: CR>Or an improper setup string that is allowing your modem to interpret CR>part of the file as a command to hang up. That's what I think the problem has to be, Charlie! When I installed the program, I accepted the defaults. Something in the QMPFW program itself (meaning the settings) has to be incorrect...but I don't know what, and I don't know how to find out what is wrong!!! That's why I posted my messages here...sort of my last resort. CR>Try turning on the logging function in QMPro. After an upload fails, CR>there may be a message explaining what happened. That's a good idea, Charlie, and I tried it. All it shows is the transfer was aborted. No reason given, and nothing extra, or out of the ordinary compared with a successful upload! B:( THIS IS WRONG! I thought you meant the scrollback function, which is what the above answer applies to, and it is correct for that. BUT.... I didn't know about the Logging function! I stumbled across it today, while reading all of the Help screens again for the umpteenth time. When I turned it on and tried another u/l, which failed of course, the log showed a REASON!!! It said: "No room for new char in buffer" I assume that char is character.? I don't know what this means, except for a literal reading, nor do I know how to fix it (make the buffer larger?). I'm hoping that you do, since you mentioned the Logging function!!! I hope you'll reply soon, Charlie, because I think fixing this will get my QMPFW running like a bright red, yellow and green top! Bob --- OLXWin 1.00 ... Exercise, eat right, stay fit, die anyway. * Origin: NEOPC BBS Cleveland, Ohio USR V.34 (216)835-5763 (1:157/427) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDF00011 Date: 09/08/95 From: BOB RICHARDS Time: 10:09pm \/To: SEAN O'CONNELL (Read 7 times) Subj: New Information on Proble Hi Sean, Here's a copy of my post to Charlie Rovner, which contains the new info I've come up with on my u/l problem. I'm hoping it will mean something to you, since you seem very knowledgeable about the inner workings of the modem and comm software! I'm hoping you can suggest a fix. Hi Charlie, My reply to you was wrong! I've left part of the message here, so you'll know what I'm talking about: CR>Or an improper setup string that is allowing your modem to interpret CR>part of the file as a command to hang up. That's what I think the problem has to be, Charlie! When I installed the program, I accepted the defaults. Something in the QMPFW program itself (meaning the settings) has to be incorrect...but I don't know what, and I don't know how to find out what is wrong!!! That's why I posted my messages here...sort of my last resort. CR>Try turning on the logging function in QMPro. After an upload fails, CR>there may be a message explaining what happened. That's a good idea, Charlie, and I tried it. All it shows is the transfer was aborted. No reason given, and nothing extra, or out of the ordinary compared with a successful upload! B:( THIS IS WRONG! I thought you meant the scrollback function, which is what the above answer applies to, and it is correct for that. BUT.... I didn't know about the Logging function! I stumbled across it today, while reading all of the Help screens again for the umpteenth time. When I turned it on and tried another u/l, which failed of course, the log showed a REASON!!! It said: "No room for new char in buffer" I assume that char is character.? I don't know what this means, except for a literal reading, nor do I know how to fix it (make the buffer larger?). I'm hoping that you do, since you mentioned the Logging function!!! I hope you'll reply soon, Charlie, because I think fixing this will get my QMPFW running like a bright red, yellow and green top! Bob --- OLXWin 1.00 Kato Kaolin - PROOF that Ginger slept with Gilligan! * Origin: NEOPC BBS Cleveland, Ohio USR V.34 (216)835-5763 (1:157/427) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDF00012 Date: 09/10/95 From: ZACK JONES Time: 07:39pm \/To: MEL MITTS (Read 7 times) Subj: Qmodempro for windows95 MM> Anyone using the new QModemPro for Windows95 (v2.0)? Yup, every day. MM> Can you comment on the vicious rumor that it does NOT, I say again, does MM> NOT include fax capabilities? You're right it does not include fax WIN95 has fax support so MSI spent their time adding other features. Take Care, Zack Jones zack@hom.net --- * OLXWin 1.00b * Young at heart... slightly older in other places. --- InterEcho 1.11 * Origin: Zack's Shack (912) 923-0642 (1:3611/18) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDF00013 Date: 09/07/95 From: MIKE WYCHE Time: 10:26pm \/To: SYSOP (Read 7 times) Subj: Comment 09/07/95 22:25 Hay I was just trying to get into the CD rom door and it didnt work. Then it told me to leave you a message that i didnt work. Oh by the way did you know that your CD rom doesnt work? Sorry im tired. And please your hard drive list isnt letting me access it to download. Thanks again Your Pal Mike --- Platinum Xpress/Wildcat! v1.0N * Origin: SoftWare Solutions, Inc. : (808)833-6964 (1:345/6) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDG00000 Date: 09/10/95 From: HUGH BAKER Time: 06:00pm \/To: STAN DOREMUS (Read 7 times) Subj: Serial Number -> Could any of you tell me where to find the serial number for my -> sportster?? Usually on the engine case below the carb and on the frame it should be on the gooseneck by where the front forks are. --- Platinum Xpress/Wildcat! v1.0h * Origin: Chemeketa OnLine : 503-393-5580 (1:3406/15) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDG00001 Date: 09/10/95 From: HUGH BAKER Time: 06:04pm \/To: LEAH OWENS (Read 7 times) Subj: Qmodem Phone #? Do you have a phone number where I can reach the authors/supporters for Qmodem? Also, do you happen to know the "GO" word to reach them on Compuserve. I have Procomm Plus for Windows Ver 1, but I want to upgrade and change software programs. I wonder if the latest Qmodem has the features I am looking for? --- Platinum Xpress/Wildcat! v1.0h * Origin: Chemeketa OnLine : 503-393-5580 (1:3406/15) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDH00000 Date: 09/11/95 From: ANTHONY BAILEY Time: 12:36am \/To: TONY BIONG (Read 6 times) Subj: COMM # TB-->I have a External 14.4 that plugs into comm3. And my mouse uses Comm1. -->When I use Qmodem they interupt saying all comm ports are closed or -->Comm3 is being used by another device or somthing. This happens when -->using any Comm program that supports a mouse like Ripterm. Does anyone -->know what to do. Ill trade this external for an internal 14.4 anytime. Comm 1 and 3 use the same IRQ's, so you either have to change the IRQ on three, or find a way to hook up the external modem on comm 2, since it should be open. Perish * QMPro 1.52 * COBOL...(C)ompiles (O)nly (B)ecause (O)f (L)uck. --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDH00001 Date: 09/11/95 From: ANTHONY BAILEY Time: 12:39am \/To: CHARLIE ROVNER (Read 6 times) Subj: Re: Qmpro dos 1/2 CR-->Whaddaya mean might? Look for a file called QMPRO153.ZIP (or similar) -->for a free download from many BBSs (or MSI's own BBS). It's a free -->upgrade to 1.53, with mostly bug fixes. It includes an update for -->the OLX bundled with it, too. Thanks for the reply Charlie. I have been looking on all of our local boards here in Tucson, but can't find it. Does Mustang have an internet FTP site at all that you know of? Thanks. Perish * QMPro 1.52 * Country music- The only legal form of torture in the US. --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDH00002 Date: 09/10/95 From: CHARLES DOBBS Time: 09:12pm \/To: MIKE WYCHE (Read 6 times) Subj: Comment 09/07/95 22:25 -> Hay I was just trying to get into the CD rom door and it didnt work. -> Then it told me to leave you a message that i didnt work. Oh by the -> way did you know that your CD rom doesnt work? Sorry im tired. And -> please your hard drive list isnt letting me access it to download. -> Thanks again Your Pal Mike Sorry, I don't have the foggiest idea what you're talking about. I have no record of you ever calling my board unless you logged in as a Guest in which case you wouldn't have access to anything but the wildcat file area and the guest file area on the hard drive and nothing else, no lists, no user list, very restrictive access. Were you trying to do a file request or what were you looking for? If it wasn't wildcat stuff then you're kinda outta luck unless you're a subscriber. --- QScan/WC v1.18b / 01-0550 * Origin: The Police Station BBS * Nashville, TN * 615-226-7841 (1:116/6) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CDH00003 Date: 09/10/95 From: CHARLES DOBBS Time: 09:34pm \/To: MIKE WYCHE (Read 6 times) Subj: Comment 09/07/95 22:25 -> Hay I was just trying to get into the CD rom door and it didnt work. -> Then it told me to leave you a message that i didnt work. Oh by the -> way did you know that your CD rom doesnt work? Sorry im tired. And -> please your hard drive list isnt letting me access it to download. -> Thanks again Your Pal Mike Mike, I left ya a message, but I think you must have meant another Charles Dobbs other than me, since you mentioned Your Pal (and I don't know you from beans :) --- QScan/WC v1.18b / 01-0550 * Origin: The Police Station BBS * Nashville, TN * 615-226-7841 (1:116/6)