--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00006 Date: 08/26/95 From: BOB SEABORN Time: 10:37am \/To: MICHAEL VAN.METER (Read 8 times) Subj: Some message area alerts > Sorry, Looks like he has another problem. I left this in a log off > message! I'll call him voice! > > > EM> > Hi Frank, > EM> > I've noticed a couple problems you might want to address. 's Thank you, it's greatly appreciated. .....Bob --- GEcho/32 v1.20/Pro * Origin: From the Keyboard of the Echo Moderator (1:140/12.1) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00007 Date: 08/26/95 From: STEVE HOWLAND Time: 12:39am \/To: VINH TRAN (Read 8 times) Subj: RE: QMODEMPRO FOR WINDOW While gabbing out loud Vinh, said to Bill... VT> You can get the Full Retail for $85.48 at most computer stores. But VT>that's still too much to spend for a communication software. I was just on MSN and somebody said they got it for $69.00 at CompUSA. I found an old Qmodem v4.5 and they honored the $49.00 price. //// Steve Howland (o o) Fido 1:343/230.0 ----oOO--(_)--OOo---- srhowland@msn.com --- * UniQWK v3.3a* Floppy Drive not ready. Format hard drive instead? (Y/n) * Origin: Snohomish Systems *(206)353-3013* USR v.Everything (1:343/165) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00008 Date: 08/22/95 From: SHELTON GREEN Time: 09:43pm \/To: ANTHONY BAILEY (Read 8 times) Subj: QmodemPro For Windows 95 On (18 Aug 95) Anthony Bailey wrote to Roy Behrens... AB> RB-->Hi, TCS is Tucson Computer Society. You have to be a member of a user AB> -->group to get the discount. AB> -->Roy Mustang just sent me an offer to buy the Qmodem upgrade for Win 95 $49.95 before Sept. 30, 1995 ... --- PPoint 1.92 * Origin: A Professional Point System (1:396/17.30) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00009 Date: 08/27/95 From: DAN MORGAN Time: 08:05am \/To: JOEY SCHWARTZ (Read 8 times) Subj: Host to DOS Hi Joey. I'm having the same problem with Host not letting me go to DOS. I have QMP v1.53. Let me know what you come up with. Thanks --- QScan/PCB v1.17b / 01-0173 * Origin: The File Exchange 410-744-1102 Catonsville, MD (1:261/1134) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00010 Date: 08/27/95 From: DAN MORGAN Time: 08:10am \/To: JOE GUIDERA (Read 8 times) Subj: QMP Host Hi Joe, you seem too know QMP well. I have QMP v1.53 DOS. Everything works great but the host mode won't let go to DOS. All paths and passwords are correct. I even checked S registers. Also, where can I get different fonts for the FAX. Thanks in advance --- QScan/PCB v1.17b / 01-0173 * Origin: The File Exchange 410-744-1102 Catonsville, MD (1:261/1134) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00011 Date: 08/26/95 From: ANTHONY BAILEY Time: 11:50am \/To: JOHNNY TEIXIDO (Read 8 times) Subj: Rip JT--> Hi, im having trouble with Q-modempro. Every time i call a bbs with rip -->graphics, and i capture information. I try to read the file with dit.com -->in dos. It does'nt show everything that i captured on screen. Any help wil -->be appreciated. Thanks Maybe you should use scrollback instead of capture. If you scroll back and then save it, you'll get everything. Perish * QMPro 1.52 * Tagline: Your last chance to piss someone off! --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00012 Date: 08/26/95 From: ANTHONY BAILEY Time: 11:58am \/To: LYLE TAYLOR (Read 8 times) Subj: QMO153 LT-->Tony, here is what went on in v1.53 LT--> * The patch process will ONLY operate on v1.52! If you have an --> earlier release you must first obtain and perform an update to --> v1.50 and then v1.51 and then v1.52. Thanks Lyle, I don't think that there is enough of a difference to make me want to change over. I appreciate the reply though. Perish * QMPro 1.52 * Ten things we don't know yet- Carlin's Book Club --- WILDMAIL!/WC v4.12 * Origin: Partners For Peace (1:300/705.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00013 Date: 08/26/95 From: RICK PUMPHREY Time: 10:57pm \/To: ALAN AYCOCK (Read 8 times) Subj: wc script Greetings Alan! Hi Rick, I just wanted to say thanks for the scripts. The one for Wi worked great the only thang that I had to edit was the waitfor that p for the qwk/rep prompt to "wcMail command?". it was my pleasure sending you those scripts. Sorry, I kinda buried you with so many of them. If I can be of help to you in the future just let me know. Blessings to you and yours! Rick --- WILDMAIL!/WC v4.12 * Origin: The Lakeside Connection! Lakeside, California (1:202/1317.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCZ00000 Date: 08/28/95 From: ECHO MODERATOR Time: 12:04am \/To: ALL (Read 7 times) Subj: Monthly Echo Rules Announcement QMODEM_USER Echo RULES QMODEM_USER is a product support echo open to all for the discussion, chat, assistance, etc. of the excellent terminal program QMODEM. Posting a message in this echo will be understood by the Moderator to be a declaration of your intent to abide by these and any other rules that may, of necessity, be formulated. Repeated, willful and/or flagrant violations of the rules of QMODEM_USERS will result in a request to the offender's echomail supplier to cut their access to this echo. 1. The topics of this conference should be related to Qmodem and/or and utilities related to Qmodem, including but not limited to external protocols usable with Qmodem. Any messages not on-topic will be considered annoying. 2. Challenge the ISSUE, not the message poster. Foul language belongs on the street, not here. Foul or harsh language will not be tolerated. If you don't like what someone has to say for personal reasons, send them a reply using netmail - not echomail. 3. Use of handles and or aliases is not allowed. Those people who are ogged on to bbs's using an alias should post their real names prominently in he body of each message they post. 4. Discussion of software piracy, including ways to 'register' unregistered shareware will not be tolerated. 5. Advertising for commercial ventures, even though Shareware related, will not be tolerated. Use either a local conference which permits such material, or use Fidonet Matrix mail, where only you pay for it. NOTE: An author's announcement of a Shareware program will not be considered a commercial advertisement. 6. There will be no usage of any high ASCII characters, BBS colour control codes, or PGP 'signatures'. Standard signatures are requested to be only one line, but may NOT exceed two lines at the most. 7. There shall be no bashing of hardware, hardware manufacturers, software programs, software authors or any other individuals. If you have a roblem with a program, company or piece of equipment and want to discuss it in n effort to get some help, fine, but let's not tear something down unless you can offer constructive suggestions for building it back up. 8. This conference MAY NOT be gated to the BIX echomail system, GroupMail or to any other network's echomail system WITHOUT permission of the Moderator. This is not to say it cannot be done, however the moderator must know where the echomail is going, and who the gateways are. essages in this conference should conform with the FTSC (FidoNet Technical Standards Committee) format and must contain a tear and origin line. The tear line may not be longer than 35 characters including the "-" chars. The origin line must fit on one 80 character wide CRT including the " # Origin: " text. Eight-bit ASCII is not allowed in this conference. All characters in displayed message data (text/header) must be in the range 32 to 126, which rules out control characters. The exception to this rule is if you need to show someone a translation table that contains ight-bit ASCII. 9. Treat others as you wish to be treated yourself. Please keep the amount f quoted text down to the bare essentials. Do not quote SEEN-BY and/or " # Origin: " information unless it is ABSOLUTELY necessary. One of the biggest costs with distributed mail conferences is the use and MISuse of the quote feature. Please keep "Thank you" and/or "This is a test" messages in NETMAIL, where they belong. People are paying plenty of oney to ship this conference around and if we can keep unnecessary overhead down, we'll all be happier. 10. There is only one Moderator, me! If you feel someone has broken the ules please NETMAIL the Moderator and don't take it upon yourself to admonish anyone. Let the Moderator moderate! Leave the moderating to ME. If you want to moderate, become a moderator first. 11 Messages from the Moderator concerning enforcement of the rules are not considered off-topic, however, neither are they topics for general discussion by anyone other than the Moderator and the person being addressed. i.e., if the Moderator deems it necessary to write a person in the echo who is in violation of the rules, it is not a sign that the topic is a free for all and everyone can jump in. Discussion should remain between the Moderator and the person being addressed only! (Just a further clarification of "Let the Moderator Moderate!) I work on a "three strikes you're out" basis. * First a public warning. * Second a netmail warning. * Third time and you are asked to leave the conference. If you do not comply with a request to leave the conference, or if a sysop does not comply with the moderator's request to disallow a user from access to the conference, distribution of the echo can and will be cut to that node. Excommunication from the echo shall be for a minimum of 15 days cooling off period for first offense, 30-60 days minimum for a second offense (Moderator's option) and permanently should you be cut a third time. The SysOp of each board carrying this echo is granted the right to Edit or Kill messages which, in their opinion, are inappropriate and unacceptable n their system. Exception to this rule is the killing or editing of any messages received prior to feeding them to linked systems. This is NOT permitted. Please use common sense when interpreting this rule and, if in doubt, netmail queries will be promptly answered. However should you do o, I'd appreciate netmail explaining which message and why you felt it should be killed on your system. That's it, except that if someone comes up with a new and improved way to aggravate people, I reserve the right to make a rule to fit the occasion. Bob Seaborn Moderator QMODEM_USER Fidonet 1:140/12 Internet bseaborn@eagle.wbm.ca --- RoboMail v 3.0 (reg) * Origin: The Data Dump BBS (306) 956-3383 (1:140/12.3) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCZ00001 Date: 08/20/95 From: FREDDY HIRSCH Time: 03:21am \/To: SCOTT HEALD (Read 7 times) Subj: qmodem-host mode? SH>i am currently using q-modem,and i am wondering if someone can answer SH>the following question:i am looking for host mode,but the only thing SH>that sounds "close" to it is something called split-screen mode.i want SH>a program that has host mode,like comit(which i used to have).i press SH>alt-s,and get split-screen mode.this is not what i need.i want host mode SH>so people can call me via computer and "talk" to me,so to speak. SH>can anyone tell me if q-modem has host mode?if so,it's not listed in SH>the command menu when i press the home key.thanks a lot for taking time SH>to read this,and ANY information will be most appreciated. SH>later,scott l. heald. SH>--- WILDMAIL!/WC v4.12 SH> * Origin: DATA MANAGEMENT Ionia, MI (616) 527-4103 V.34 * V.FC (1:11/460.0 Scott, Try Alt-5 I think. It's either that or Alt-F5. I know it's one of them. Freddy --- OLX 2.2 TD Yeah, but what's the speed of DARK? --- WM v3.11/93-0947 * Origin: Waterside BBS - NJ - (201) 641-5375 28.8k (1:2604/568.0)