---------------------------------------------------------------------- QmodemPro v1.53 - Changed the port assignment numbers for DigiBoard cards to reference COM1 as PORT 0, COM2 as PORT 1, etc. This change was made to have our references match those given by DigiBoard and Wildcat!. - QmodemPro will now display an actual error message instead of a number when the disk is full. - Fixed a longstanding problem where QmodemPro would not go into RIP mode and reported the wrong error condition. If we fail to go into RIP mode the proper error message will now appear. - Fixed a problem with printing support in VT emulations. Printer was being opened and closed each time it was accessed. This caused the network printer support on Novell to eject a page for each character. - Changed Zmodem to include support for escaping all control characters. This should fix the problems with using Zmodem on Delphi and any other systems that request escaping. - Changed the way the RIP RestoreMouseFields works. It used to redraw the buttons all the time. Now it skips the drawing of the graphics. - VT Emulation colors have been fixed. If Strict Color is set, then real VT Colors are used. Otherwise, it works exactly like 1.52 did and will reference the colors defined in the custom color config. - Fixed a sporadic 201 error when doing uploads. - Fixed numerous minor ANSI and VT emulation bugs. Added support for scrolling regions to ANSI. - Fixed the RIP $RESET$ command. Would cause an infinite loop and hang the system under some conditions. - Fixed a problem with the NACS init code. It could only allocate the first port that matched the the Server General and Specific parameters. It now searches the wildcat matches thoroughly until a match is found or it runs out of possibilities. QmGate - Fixed a problem with receiving long text messages from MCI and CIS. It would generate 214 errors (collection overflow) if the message exceeded something like 16000 lines. Now, it splits long messages at around 1000 lines each. - Increased the number of sections supported in a single forum to 26. - Various minor adjustments for better performance. OLX - Fixed a problem with @READ so it won't look like it locked up with some long files - Changed @READ so it accepts wildcards like *.msg. - Changed carbon copy processing so it uses the correct 'From' name on each message. Also changed New message code so if a message is written outside of any packet context, then the correct From name is used. - Fixed a problem with creating REP files with the internal zipper if there wasn't enough memory available. OLX will now automatically invoke the external zipper if the internal one fails. - Added support for internal PKZIP 2.0 decompression. - Added the ability to export messages with no lines (empty messages) to the REP file properly. This is for use with file requests to a Wildcat! system where the request is in the Subject field. - Fixed apostrophes and possessives in the spell checker. - Added support for PCBoard style " @FROM" header lines. Lyle M. Taylor - Rapid City, So. Dak - RaceNet 7223:7200/643 FidoNet 1:293/643 - Internet Lyle.taylor@f643.n293.z1.fidonet.org --- Via Silver Xpress V4.02B03P SW12290 * Origin: Ducky's 605-393-9626 V.34 (1:293/643) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCV00001 Date: 08/24/95 From: MIKE GILLAM Time: 09:20pm \/To: SCOTT HEALD (Read 7 times) Subj: qmodem-host mode? =========================================================================== BBS: COMPUTER WORKS TECH SUPPORT Date: 08-12-95 (05:51) Number: 6 From: SCOTT HEALD Refer#: NONE To: ALL Recvd: NO Subj: qmodem-host mode? Conf: (720) F-Qmodem U --------------------------------------------------------------------------- SH=i am currently using q-modem,and i am wondering if someone can answer =the following question:i am looking for host mode,but the only thing =that sounds "close" to it is something called split-screen mode.i want =a program that has host mode,like comit(which i used to have).i press =alt-s,and get split-screen mode.this is not what i need.i want host mode =so people can call me via computer and "talk" to me,so to speak. =can anyone tell me if q-modem has host mode?if so,it's not listed in =the command menu when i press the home key.thanks a lot for taking time =to read this,and ANY information will be most appreciated. =later,scott l. heald. SH=--- WILDMAIL!/WC v4.12 = * Origin: DATA MANAGEMENT Ionia, MI (616) 527-4103 V.34 * V.FC (1:11/460.0 I use the trial demo happily the keystrok alt-h turns on host for me. * SLMR 2.1a * All wiyht. Rho sritched mg kegtops awound? --- Michiana's Mail Hub! * Origin: CW Technical Support - South Bend, IN - (219) 272-8129 (1:227/129) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCV00002 Date: 08/22/95 From: MICHAEL VAN.METER Time: 11:39am \/To: ECHO MODERATOR (Read 7 times) Subj: Some message area alerts Sorry, Looks like he has another problem. I left this in a log off message! I'll call him voice! EM> > Hi Frank, EM> > I've noticed a couple problems you might want to address. One's n EM> > your setup. The area that you have labeled as HDsale is actually EM> > Ham4sale (Hamsale?). ___ X QMPro 1.53 X X Hello, I am part number ||X||||X||X||X|| --- Maximus 2.02 * Origin: Dreamline II BBS (1:2614/707) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00000 Date: 08/23/95 From: KEVIN AGARD Time: 06:34pm \/To: MATT VIDAS (Read 8 times) Subj: modem init. MVIf i were you, I'd go to your nearest file bbs, and get the files MVQMPRO150.EXE QMPRO151.EXE QMPRO152.EXE and QMPRO153.EXE MVAll 4 of those files together is 2,097,731 bytes, but you'll be in qmpro MVversion 1.53 with many bug fixes He's probably asking about QMP4WIN 1.11a KMA --- QMPro 1.53 Daddy, what does "FORMATTING DRIVE C:....." mean ? * Origin: NAEMT BBS : 1-800-64-NAEMT (1:3632/80) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00001 Date: 08/26/95 From: MATT VIDAS Time: 01:54am \/To: NATHAN GUTMAN (Read 8 times) Subj: Re: Modem Init. -> > * Origin: Knight Moves BBS - Rochester, NY 716-865-2106 -> (1:2613/313) Are the files QMPRO* Qmodem test drive, shareware that -> they are available on BBS's? I am using QMODEM Test Drive. Is what -> you suggest any different, better? I dont use Qmodem TD i use Qmodem Pro, which is better.. but i haven't really used qmtd.. the qmpro150,151,152,153 are for qmpro, not qmtd.. but qmpro isn't shareware its a program you can buy from mustang or you can get it in some stores.. --- PCBoard (R) v15.21/5 * Origin: Hat's Place - Ogden,NY USR/28.8/v34 716.594.4267 Node-1 (1:2613/386) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00002 Date: 08/25/95 From: FRED HALL Time: 03:53pm \/To: PAUL CHAFFEE (Read 8 times) Subj: Qmodem for Win95 In a message to Fred Hall, Paul Chaffee said: PC>Hello Fred! PC>13 Aug 95 10:04, Fred Hall wrote to Ron Bowden: FH> In a message to Fred Hall, Ron Bowden said: RB>> Re: Qmodem for Win95 >> Fred -- hallf@rl.af.mil -- now using Win95 build 490 & Qmodem for >> Wi RB>> What is the advantage of the Win95 version? I am using QModemPro RB>> with and it works fine. FH> Being a true 32-bit app, it uses multiple threads and is more reso FH> efficient. It can take advantage of other Win95 goodies too like FH> having the little modem icon in the taskbar, etc. FH> Fred -- hallf@rl.af.mil -- now using Win95 build 490 & Qmodem for FH> Win95 PC>I just got QmodemPro For Win 95 and it runs great. Now that I've got the "real" Win95 release installed, I'll be ordering my QM95 upgrade soon. Fred -- hallf@rl.af.mil -- powered by Win95 & Qmodem for Win95 ... What is "Laptop" spelled backwards??? * Wave Rider 1.33 # 81 * --- GEcho 1.11+ * Origin: PowerLine OLS 315.865.4070 Marcy NY (1:2609/2) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00003 Date: 08/26/95 From: BOB RICHARDS Time: 09:51am \/To: ALL (Read 8 times) Subj: Does Anyone Live In This HELLOOOO, IS THERE ANYONE THERE? HELLOOOO, ANYONE HOME?! Sex, violence, money...there, I've used all of the attention grabbing, man on the street buzz words...now, is it possible to get a response to a request for help with QmodemPro for Windows? I didn't mean to stump everybody with an easy one like the program doesn't upload anything at all! I thought this was the home of the experts, or at least that's what a couple friends told me!!! How about a company rep lurking around, or are they too busy with their $129.00 Win95 program? If there is an expert, or even a pseudo expert, in attendance, I still need the help I asked for in "Qmodem Pro for Windows--NEED HELP!". Bob --- OLXWin 1.00 To live long and prosper...avoid lawyers. - Spock * Origin: NEOPC BBS Cleveland, Ohio USR V.34 (216)835-5763 (1:157/427) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00004 Date: 08/24/95 From: ALAN AYCOCK Time: 01:21pm \/To: RICK PUMPHREY (Read 8 times) Subj: wc script Hi Rick, I just wanted to say thanks for the scripts. The one for Wildcat worked great the only thang that I had to edit was the waitfor that promts for the qwk/rep prompt to "wcMail command?". See ya later, Alan ... My other computer is a 486. ___ Blue Wave/QWK v2.12 --- Platinum Xpress/Wildcat! v1.1PR * Origin: Frequencies R Us 919-851-3121 (1:151/161) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: CCY00005 Date: 08/26/95 From: LANCE SPENCE Time: 12:19pm \/To: ALL (Read 8 times) Subj: QMPRO V1.0 For Windows I hope someone can help me. I have QmPro V1.00 for Windows and on an average I get 1380-1400 CPS and 70-80% efficency when downloading or uploading. I'm also using CYBERCOM in place of the windows comm driver. Is there anything I can do to get a faster CPS rate and efficency? I also am using a ZOOM Internal 14.4K fax modem with a 16550A UART on the modem board. Finally are there any upgrade or patch files out, so that I can upgrade my verison? --- ProBoard v2.10 [Reg] * Origin: /The Shadows BBS - Virginia Beach, VA - (804)486-2253\ (1:275/35)