--------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5Z00000 Date: 05/27/95 From: GEORGE SMITH Time: 10:51pm \/To: ALL (Read 7 times) Subj: OLX I was wondering if anyone could help me with this problem. I have a lot of messages CUT by OLX. They appear normal on the BBS, but the quoted messages are sliced, and the TOPIC: is cut off if it gets too long. Why? --- QMPro 1.52 Tried to play my shoehorn... all I got was footnotes! * Origin: Ajax Cat Grinder * St. Louis, MO (314) 282-4216 (1:100/215) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00000 Date: 05/28/95 From: DAVID SISSON Time: 07:42pm \/To: JOE CARPENTER (Read 8 times) Subj: QMPro1.53 problems JC-> What's about to drive me up the wall is that the modem works great with AOL ! I missed that originally... If your connecting ok with AOL, then your init string in the QmPro config is not set correctly. ALT-N -> Config -> Device Quick Config Select your modem. If it is not listed, then choose a hayes compatible option. (Or call Mustang's board and get the latest MODEMS.DATE file. It is a free download. Hopefully it will have your modem listed.) ALT-N -> Config -> Hardware Make sure the Port selected is COM3. Might set the port speed to 19200. -> Now, my problem with calling Mustang is this: I bought the QMPro with a -> friend; he had the disks and manuals but has since sold his system and -> all programs and manuals went with it. If I call Mustang, I'll need the -> registration number, which I didn't write down on the back-up disks I ALT-N -> Help -> About This should show you the serial number. I hope this works... If not, leave another message. --- QMPro 1.53 No... Why, have YOU ever snorted laser toner? --- * Origin: * Mississippi Online * 601-356-9032 * 28.8 * (1:361/205) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00001 Date: 05/28/95 From: DAVID SISSON Time: 07:42pm \/To: JAMIE RODGERS (Read 8 times) Subj: HELP! HSLINK Still doesnt work! JR-> Subject: HELP! HSLINK Still doesnt work! JR-> Running the Qmodem test drive. Cant get HSLink to work. Read in a previo -> post to use HSLINK %2 %3.... in a .bat file but all it does is drop to DOS JR-> Questions: -> When setting up the protocol, do I answer "yes" to filename prompt? I don't use the external protocol in the TD version. You have the problem of it prompting for a filename. You don't need to enter a filename since HSlink takes care of this itself. I specify a Function Key (ALT-J). In this field, enter SHELLX "HSLINK.BAT".(Use quotes) Now when you start the download on the BBS, just hit your Function Key. HSLINK should pop up, Receive the files requested and if you've specified any files to u/l, those will be sent also. After the d/l, HSLINK will end and you'll return to Qmodem. -> Where do I specify the names of the files I want to UL? Does this get don -> in advance? Have the HSLINK.CFG point to the QMODEM.BEW. This is the file created when you ALT-6 and pick files for u/l. Be sure to save it. The u/l will be automatic. (If your local BBS is setup to handle bi-directional protocol.) -> When done UL'ing does it automatically return to Qmodem or stay in DOS? Qmodem, as explained above. JR-> Help! I hope I have. --- QMPro 1.53 Why is there a permanent press setting on an iron? --- * Origin: * Mississippi Online * 601-356-9032 * 28.8 * (1:361/205) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00002 Date: 05/28/95 From: DAVID SISSON Time: 08:15pm \/To: TIMOTHY BALINGIT (Read 8 times) Subj: Qmodem SST 4.5 TD Host Md TB-> I have Qmodem SST 4.5 Test Drive for DOS. It has a host mode. In host -> mode, how do you get " Other Options" to work?? When I try to use it, -> it says, "Open script command not available". Can anybody help me?? I think it's QMHOST.SCR and QMHOSTL.SCR that it's looking for. Once the script executes, you can run anything from there by using the SHELL and SHELLX commands. Check the docs for details on the script language. As I remember, you'll need to use DOORWAY, unless the program has it's own comm routines. --- * Origin: * Mississippi Online * 601-356-9032 * 28.8 * (1:361/205) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00003 Date: 05/28/95 From: GEOFFREY WILSON Time: 10:13am \/To: RUSS DERRY (Read 8 times) Subj: Problem RD>KA>Qmodem Pro for DOS, and it's in a drawer somewhere. I still like the RD>KA>shareware version QM45TD best. RD> Kent I have been thinking about buying qm pro for dos and even RD> though I belong to a club and can get it for 49.95 that is still RD> more than I can handle and would ask if you would be interested in RD> parting with your copy. I am after the manuals for reading mostly. RD> I am currently running qm 4.60td with olx-td and really enjoy it but RD> have found the doc's lacking or perhaps it is me that is the lacking RD> part. . The doc's do not explaine much and was hoping to pick RD> ;up some stuff from qm pro. Tnx Russ You can get QModem 5.01 with OLX2.2, printed manual, license, and support, as a clearance offer direct from Mustang for $20 including shipping. You'll be entitled to buy newer versions at the upgrade price. It is similar to, but slightly better than, QM4.6TD. You need to keep your present QMODEM.MDF file, which is newer, and compatible. Mustang's ordser number is 1-800-999-9619. --- OLX 2.2 ... Only XT users know that January 1, 1980 was a Tuesday * Origin: State College, Pa. (1:129/215) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00004 Date: 05/26/95 From: SYLVAIN LAUZON Time: 09:01pm \/To: CRAIG PEASE (Read 8 times) Subj: Command -> Running QMPRO 1.53 for DOS and looking for a good Upload & Download -> command to add for HSLINK. Any help out there. -> -> Using 14.4 Com 2 with dirs c:\download -> c:\upload -> -> --- -> * Origin: A Change For The Better (1:115/283) You can not get better than what you have. When i use hslink in download mode only. An error indicate me upload not outgoing. --- WILDMAIL!/WC v4.12 * Origin: ALLEY CAT BBS!!! (1:167/195.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00005 Date: 05/26/95 From: SYLVAIN LAUZON Time: 09:04pm \/To: WILLIAM VITAL (Read 8 times) Subj: Command -> CP>Running QMPRO 1.53 for DOS and looking for a good Upload & Downloa -> CP>command to add for HSLINK. Any help out there. -> CP>Using 14.4 Com 2 with dirs c:\download -> CP> c:\upload -> -> OK, here they are... -> QMP--External Protocol: -> P HS/LINK -> D HSD.BAT -> U HSU.BAT -> o "HS*"^B -> ^^^^^^^ I might be faster to push your key if you wanna make an upload. Cuz this string is like Auto-Zmodem but works on both direction. --- WILDMAIL!/WC v4.12 * Origin: ALLEY CAT BBS!!! (1:167/195.0) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00006 Date: 05/29/95 From: BOB SEABORN Time: 08:10pm \/To: LUKE SCHRODER (Read 8 times) Subj: Check out this Internet deal! > Hey, is this message getting to you? Yes, it's getting out. > Crisena??? > I'm just testing this Internet stuff. And you're doing it in the *WRONG* place!! This is an international echo devoted to the care and feeding of Qmodem in it's various incarnations, plus any external support utilities it needs, not a gateway for Internet routed email. Contact your sysop for full instructions on how to accomplish what you wish. .....Bob, moderator QMODEM_USERS --- GE 1.11+ / IM 2.29c * Origin: From the Keyboard of the Echo Moderator (1:140/12.1) --------------- FIDO MESSAGE AREA==> TOPIC: 248 QMODEM USER Ref: C5^00007 Date: 05/28/95 From: STEVEN UHRIG Time: 07:21pm \/To: LILA GODEL (Read 8 times) Subj: Qmpro for Windows 1.11b On 05-27-95 Lila Godel said to All about Qmpro for Windows 1.11b D LG>This message was originally addressed to ALL LG>and a carbon copy was sent to you. LG> ---------------------------------------- LG>Me and my Dad recently switched some systems around. In the LG>process we moved a hard drive with Qmpro for Windows 1.01 from a LG>CompuAdd 320 to a CompuAdd 325 with both systems being DXs. After LG>the switch I modified the 325 to use a Tens (SP?) 800x600 Small LG>driver on a CompuAdd High Res Windows driver disk we have in place LG>of the Windows VGA previously installed on the hard drive. The the LG>320 had supported only low res drivers, but the 325 did and I LG>wanted to use one. Today I upgraded the Qmpro for Windows to 1.11b LG>using the 1.10 and 1.11b patches from the Mustang HQ. When loading LG>it to make sure it was at 1.11b I noticed that unlike on a 486/DX LG>66 we have with a TRIDENT 800x600-256c for 1M Board (Faster) driver LG>there was no pattern visible as with the VGA driver. I would like LG>to have the patter visible. Any ideas on how to make the Windows LG>size the right size for this driver so I can see the pattern? To change the screen size so that you can see the wall paper, do the following: 1. Select options 2. Select emulations 3. Set the Screen Height and Font size for each emulation that you use until the screen size for each one suites you. Hope this helps you! -------------========<<>>========----------- ... "Man that lightning sounds clo +O^|+a- NO CARRIER" * CMPQwk 1.42-R2 780 * --- Maximus 2.02 * Origin: The Outer Limits * v.34DS * 6.1 gigs * 614-772-5520 (1:2220/10)