--------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: D5Y00000Date: 05/26/96 From: RANDELL SUMMERVILLE Time: 11:43am \/To: STEVE GEBERTH (Read 3 times) Subj: Init String! On (15 Apr 96) Steve Geberth wrote to All... SG> Greetings- SG> I am a new owner of the Microcom Deskporte 28.8S external modem. I am SG> also on the InterNet via WinSock. Can someone PLEASE tell me their SG> init string if you are running the same program(s)? Seems that SG> everything that I connect to says 38400!!! I just want to make certain SG> that I am getting the most of my machine. I think I just use AT&F for SG> the init string presently. SG> Any help would be greatly appriciated! SG> Steve SG> --- GEcho+ "The Best":-) SG> * Origin: -=[GENESIS]=- VIA SATELLITE & 28.8 (406)761-2434 SG> (1:3400/2) G'day Steve, I'm a bit late, but here's my init string. I have a Deskporte 28.8S. AT Z OK at&v ACTIVE PROFILE: B0 E1 L1 M1 N1 Q0 T V1 W0 X3 Y0 &C1 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T5 &X0 &Y1 S00:002 S01:000 S02:043 S03:013 S04:010 S05:008 S06:005 S07:060 S08:005 S09:006 S10:060 S11:095 S12:050 S18:000 S25:005 S26:001 S36:007 S37:000 S38:020 S44:020 S46:138 S48:007 S95:000 STORED PROFILE 0: B0 E1 L1 M1 N1 Q0 T V1 W0 X3 Y0 &C1 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T5 &X0 S00:002 S02:043 S06:005 S07:060 S08:005 S09:006 S10:060 S11:095 S12:050 S18:000 S36:007 S37:000 S40:104 S41:195 S46:138 S95:000 STORED PROFILE 1: B0 E1 L1 M1 N1 Q0 T V1 W0 X3 Y0 &C1 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T5 &X0 S00:002 S02:043 S06:005 S07:060 S08:005 S09:006 S10:060 S11:095 S12:050 S18:000 S36:007 S37:000 S40:104 S41:195 S46:138 S95:000 TELEPHONE NUMBERS: 0= 1=0755314846 2=0755748611 3= OK regards Randell --- PPoint 2.00 * Origin: Point surfer....Gold Coast,Qld,Australia (3:640/937.11) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: D5^00000Date: 05/30/96 From: GREG SANDERS Time: 08:19am \/To: ALL (Read 3 times) Subj: Checking out Yo All! I'm shutting down my board tomorrow. I had intended to shut the echo down due to inactivity, but just never got around to it. Perhaps there's a new suc... uh... moderator waiting in the wings. ;-) See ya out there... Have a good 'un, Greg Sanders ex-Moderator 71153,27 - compuserve gsanders@iTexas.net --- timEd-B11 * Origin: Scholium Variorum - Granbury, TX - (1:130/40) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DA300000Date: 06/02/96 From: STEVE GEBERTH Time: 04:35pm \/To: RANDELL SUMMERVILLE (Read 3 times) Subj: Init String! thanks for your help with the init string :-) Have a good day! Steve --- GEcho+ "The Best":-) * Origin: -=[GENESIS]=- VIA SATELLITE & 28.8 (406)761-2434 (1:3400/1) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DA400000Date: 06/03/96 From: JOHN HENTSCH Time: 11:38am \/To: ALL (Read 3 times) Subj: This echo I contacted Greg Sanders and he gave me this echo's elist password. I would like to keep this echo going since I own two MicroCom modem myself. If anyone has valid objection, please contact me here or netmail at 1:218/907: > Greg, can you give me the elist password for the FidoNet microcom > conference? I would hate to see it die out. Sure... the password is XXXXXXXXXXXX. Feel free to pick up where I left off. Greg Thanks, jh - --- * Origin: Mail Box BBS Glendora, CA (1:218/907.0) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAD00000Date: 06/07/96 From: CHUCK LONGLOIS Time: 06:45am \/To: JOHN HENTSCH (Read 3 times) Subj: This echo Hi John, Replying to a message of John Hentsch to All: JH> I contacted Greg Sanders and he gave me this echo's elist password. I JH> would like to keep this echo going since I own two MicroCom modem JH> myself. If anyone has valid objection, please contact me here or JH> netmail at 1:218/907: >> Greg, can you give me the elist password for the FidoNet microcom >> conference? I would hate to see it die out. JH> Sure... the password is XXXXXXXXXXXX. Feel free to pick up where I JH> left off. JH> Greg > JH> Thanks, JH> jh - Yes, by all means, DO keep this echo open. It is one of the areas I read daily. I'm still wishing for my OS/2 parallel port drivers for the Deskporte FAST. I'm beginning to think it would be faster to diassemble the windows code and rewrite it myself. :( Later, Chuck :) --- FleetStreet 1.04 NR * Origin: Underground Eagle/2 (810) 627-3333 OS/2 Warp! (1:2202/33) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAF00000Date: 06/09/96 From: DAVE DEGEAR Time: 07:06pm \/To: JOHN HENTSCH (Read 3 times) Subj: This echo > I contacted Greg Sanders and he gave me this echo's elist password. I > would like to keep this echo going since I own two MicroCom modem > myself. If anyone has valid objection, please contact me here or netmail Great! I'm happy to see that this echo will continue. Good luck in the future. ..Dave --- FMail/2 1.02+ * Origin: Brass Bed OS/2, Nanaimo, BC (604)753-2257 Microcom 28.8 1:351/300) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAF00001Date: 06/10/96 From: JOHN HENTSCH Time: 03:38pm \/To: CHUCK LONGLOIS (Read 3 times) Subj: This echo In a message to John Hentsch <06/07/96> Chuck Longlois wrote: CL> Yes, by all means, DO keep this echo open. It is one of the areas I read CL> daily. I'll certainly keep it elisted Chuck. CL> I'm still wishing for my OS/2 parallel port drivers for the Deskporte FAST. CL> I'm beginning to think it would be faster to diassemble the windows code CL> and rewrite it myself. :( I'm an OS/2er too:) It would be nice to have the parallel port driver for OS/2. I'm eagerly awaiting the next release of OS/2. I have one of my two DPF lcd sitting collecting dust. I had to switch one modem to a Hayes Optima to be able to have adaptive answering. jh - --- * Origin: Mail Box BBS Glendora, CA (1:218/907.0) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAI00000Date: 06/12/96 From: CHUCK LONGLOIS Time: 05:14pm \/To: JOHN HENTSCH (Read 3 times) Subj: Deskporte FAST collecting dust Hi John, Replying to a message of John Hentsch to Chuck Longlois: JH> In a message to John Hentsch <06/07/96> Chuck Longlois wrote: CL>> Yes, by all means, DO keep this echo open. It is one of the areas I CL>> read daily. JH> I'll certainly keep it elisted Chuck. Thanks! CL>> I'm still wishing for my OS/2 parallel port drivers for the Deskporte CL>> FAST. CL>> I'm beginning to think it would be faster to diassemble the windows CL>> code and rewrite it myself. :( JH> I'm an OS/2er too:) It would be nice to have the parallel port driver JH> for OS/2. I'm eagerly awaiting the next release of OS/2. JH> I have one of my two DPF lcd sitting collecting dust. I had to switch JH> one modem to a Hayes Optima to be able to have adaptive answering. I'm glad now that I only bought one. I'm looking into ISDN, I'm not sure what Microcom has to offer for PC's in that department, but I bet they still don't support OS/2 on their ISDN adapters, either. Later, Chuck :) --- FleetStreet 1.04 NR * Origin: Underground Eagle/2 (810) 627-3333 OS/2 Warp! (1:2202/33) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAJ00000Date: 06/14/96 From: JOHN HENTSCH Time: 11:15am \/To: CHUCK LONGLOIS (Read 3 times) Subj: Deskporte FAST collecting dust In a message to John Hentsch <06/12/96> Chuck Longlois wrote: CL> I'm glad now that I only bought one. I'm looking into ISDN, I'm not sure CL> what Microcom has to offer for PC's in that department, but I bet they CL> still don't support OS/2 on their ISDN adapters, either. That certainly will be the next device I'm going to also. Like everything else with computers, I find that if I wait and let the market develop for a newer technology, the consumer is better off in regards to price, bugs, features, ect. I'm sitting tight, but watching, for the technology to unfold for the general consumer market. jh - --- * Origin: Mail Box BBS Glendora, CA (1:218/907.0) --------------- FIDO MESSAGE AREA==> TOPIC: 247 MICROCOM MODEMS Ref: DAM00000Date: 06/15/96 From: PAT CLIMENTO Time: 02:27am \/To: CHUCK LONGLOIS (Read 3 times) Subj: Deskporte FAST collecting dust Hi Chuck! 12 Jun 96 17:14, Chuck Longlois wrote to John Hentsch: CL>>> Yes, by all means, DO keep this echo open. It is one of the CL>>> areas I read daily. CL>>> I'm still wishing for my OS/2 parallel port drivers for the CL>>> Deskporte FAST. Don't hold your breath waiting for OS/2 anything comming from Microcom.. JH>> I'm an OS/2er too:) It would be nice to have the parallel JH>> port driver for OS/2. I'm eagerly awaiting the next release JH>> of OS/2. Which release are you waiting for...Warp Server..it's out or Merlin? I hear it's due out second half of this year. Merlin and Warp Server for Dual chips also due to be comming either late 96 or middle 97. CL> I'm glad now that I only bought one. I'm looking into ISDN, I'm CL> not sure what Microcom has to offer for PC's in that department, CL> but I bet they still don't support OS/2 on their ISDN adapters, CL> either. Look into Zoom, PPI or even USR. Sysop deal on all. I just got a USR v.34 Dual Standard and it beats the DPF hands down. $249 Sysop deal External odel. Good Luck with whatever you get.... - Pat - --- GoldED/2 2.42.G0615+ * Origin: Witch's Brew/4 Home of the OS/2 WITCH @ 28.8 VFC (1:2623/68)