--------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3T00001 Date: 03/22/97 From: ODINTSOV VASSILI Time: 09:10pm \/To: ALL (Read 0 times) Subj: Modem Sale HI EVERYBODY! Here is a good deal! Does anyone need a new EXTERNAL GVC 14400 FAX MODEM?! Features include: * Whole alluminium body * 14400 Fax send and receive * 14400 Data Modem * V.42bis/MNP5 Error correction & Data Compression * Hayes AT command compatible * Full or half duplex * Auto dial & Auto answer: Auto switch between data and voice transmission * Call-back security prevents unauthorized access to your data * Compatible with all softwares AND MANY MORE ! FAST FAX TRANSMISSION ! ! FAST ENOUGH TO PLAY ALL YOUR FAVOURITE GAMES AND SURF THE INTERNET ! FREE "QuickLink II Fax" Data & Fax software and RS-232 serial cable included !!! NOT EXPENSIVE !!! * $ 110 * So if YOU are interested write me back or call on 025 2727100 --- Maximus/2 2.01wb * Origin: IBM Auckland N.Z. (3:772/20) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3U00000 Date: 03/24/97 From: ERIK-JAN BEUK Time: 11:39pm \/To: SIGVARD LINGH (Read 0 times) Subj: Does not hang up Sigvard Lingh scrisse un messaggio a All: Ciao Sigvard! SL> Sometimes my mailer/ZyXEL 2864i does not hang up, after a SL> received call. SL> Is there a way to force such a hang up? That's the same problem i had a couple of months ago until i changed binkley into the latest edition. I think it is more a problem of SW instead of HW. Also apparently it depends to the type of modem who is calling, cheap modems oftenly let my ZyXEL 2864 hang. Erik-jan >Sysop on T.R.D.< E-Mail: erik@panet.it --- timEd/2 1.01 * Origin: The Royal Dutch (HUB Liguria) --> 010/3471330 (2:332/235) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3U00001 Date: 03/25/97 From: KOSTIK KRIKUN Time: 01:17am \/To: FELIX TIKHONENKO (Read 0 times) Subj: Xyxel 訫 ⥡ 쬮, #Felix# !!! FT>>>> } all modems, which call me?(when I call - all right...) DL>>> Check init string of your modem. KK>> AT&Pn (n=0-15) - Leased Line Transmission Power Level FT> *Pn :) Sorry! You right! KK>> Register S35 bit 3 ! When is set! AT&Pn (n=0-15 equal 12-27) ! FT> Oh, tnx! Do U know any other non-documented possibilities? FT> I have 6.16 proshivka, but hasn't docs. If U have drop in FT> me, FT> plzz! Do not promise, but may be! I have some *.txt files with doc's, faq's and more ! H ! Bye #Felix# ! Be happy ! 頫 _/#Kostik_Krikun#/_ ! ! --- * Origin: !!!???!!! ! (FidoNet 2:5010/105.12) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00000 Date: 03/26/97 From: PAUL KOLTAKOV Time: 12:16pm \/To: MODERATOR (Read 0 times) Subj: Rules Hello, Moderator! Can you give me rules? --- * Origin: -=|_IVC_|=- WorkStation Vorohezh Russia (2:5025/23.68) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00001 Date: 03/26/97 From: JAM Time: 05:01pm \/To: PAUL KOLTAKOV@P68.F23.N5025.Z2.FIDO (Read 0 times) Subj: Re: Rules From: jam@jammys.net Paul Koltakov (Paul_Koltakov@p68.f23.n5025.z2.fidonet.org) wrote: : Hello, Moderator! : Can you give me rules? depends on which area you think your posting into. There seems to be a cross-link somewhere between the international ZyXEL echo (which is English), and another ZyXEL echo (which I guess is Russian). Other than the obvious language difference, they're likely both on the same topic :-) -- James A. McOrmond - AmigaOS and Linux Admin. Jammys.Net Systems - Fidonet Gateway & UUCP feed provider, Ottawa, ON JamMail Support: http://www.jammys.net/james/jammail/ --- FIDOGATE 4.1.6 * Origin: Jammys.Net Systems, Ottawa, ON (1:163/139.0) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00002 Date: 03/19/97 From: SERGEY JHUKOV Time: 08:36pm \/To: DIMITRI VAN HOVEN (Read 0 times) Subj: Zyxel Elite 33.6 Hello, Dimitri! 16 Mar 97, Dimitri van Hoven writes to Svyatoslav Grishaev: SG>> Cna anybody ask ZyXEL Co. about details ? As they launched 33.6K SG>> modem, i think 33.6K upgrade for Elite will appear soon. BTW is 33.6K SG>> a v34? DvH> I will surf to ZyXEL on the WWW soon and will take a look for 33k6 modems DvH> to be sure about this. are you have any questions? i have this modem... nice connect. but LCD - full bugs. :(( Sergey, > Team OS/2 --- GoldED/2 2.51.A0901+ * Origin: 2 beer or not 2 beer that is a question (2:5045/18) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00003 Date: 03/22/97 From: ALEX SADOVSKY Time: 10:39am \/To: ALL (Read 0 times) Subj: CPS during connect U-1496E+ v 6.16 and U10:39:2003/22/97 ࠤ ᭮ ⢮ 롪, All! What is avegare CPS when connecting my Zyxel U-1496E+ (v.6.16) and U-1496 on bad quality lines? I have near 100..400 CPS. Is it ok? I have tried to change transmit level (*pn, where n was from 4 to 14), connect protocol (&nx; &n17, &n42..&n46, etc.), control level (at&kn) and ome other options. The best speed have achieved with at&n42*p5, but even in this case connect speed usually 4800 or 7200 and CPS 100..400. P.S. Is this conference allows only English? Moderator, can I see rules? ! ᪨ ᠭ. --- , ஦! 뢠... ਭ ૨ * Origin: , 쪮, ࠨ (2:461/19.11) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00004 Date: 03/23/97 From: CONST KAPLINSKY Time: 06:01pm \/To: ALEX SADOVSKY (Read 0 times) Subj: CPS during connect U-1496E+ v 6.16 and U18:01:3403/23/97 Hi, Alex! Sat Mar 22 1997 10:39, Alex Sadovsky wrote to All: AS> What is avegare CPS when connecting my Zyxel U-1496E+ (v.6.16) and AS> U-1496 on bad quality lines? I have near 100..400 CPS. Is it ok? I'm using ZyXEL 1496E. In some cases (very bad lines) I have the same CPS. But usually it's about 1500-2000 on compressed data (with stable connect 16800). AS> I have tried to change transmit level (*pn, where n was from 4 to First try to find any good phone line and connect there. If everything will be OK (I think will be), you can tune your settings (but I think it will change near nothing). But if CPS < 240, you may wish to set up modem to V.22bis at 2400 (AT&N14). CPS will be stable near 240. But it's not a good way to use ZyXEL. :-( If CPS on good line will be 400, it means modem is not configured properly (some failure in modem or ROM? -- I don't think so). AS> P.S. AS> Is this conference allows only English? Yes. Now it has connected to non-Russian part of world again. ;-) Good Luck. Constantin [E-mail: const@b10.tpu.edu.ru] ... UI120:MAGGAGAEBEHBFIGFEAEGFGBNIDABJIMDHBPPSDGCCIB --- GoldED 3.00a3+, Squish/386 1.11, Bink/+ 3.1 * Origin: *Const Home*, Tomsk, Russia (2:5005/40.6) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3W00005 Date: 03/18/97 From: EUGENE KADUSHIN Time: 08:31pm \/To: ALL (Read 0 times) Subj: 48 KHz stereo WAV -> *.ZVD file? ਢ, All! 10 Mar 97 Udo van den Heuvel ᠫ Michail Baikov 48 KHz stereo WAV -> *.ZVD file?: UH>>> I tried to convert a (mono and stereo) 48 KHz WAV (16 bit) to a UH>>> VOC file using SOX for OS/2 and put the resulting VOC file UH>>> through ZFAX to obtain the 2/3-bit stuff the U1496E+ wants to UH>>> see. Unfortunately ZFAX and other programs choke on the VOC UH>>> files resulting from SOX. Can anybody point me the correct way UH>>> to generate VOC files for ZFAX? MB>> Use Zvoice.Cool prog!! UH> ZYVOC300.EXE ? UH> I tried it's contents but these programs also choke on the voc files. UH> :-/ HEY! IT SEAMS WE ARE NOT ALONE AT LAST!!!!!!! (00min' $00n... Senator [Advanced FTN Software Team] ... "Before you judge me try hard to love me..." (C) Michael Jackson --- Light in the Night * Origin: -= Wide Beam Station - Cooler Than Ever! =- (2:5020/889) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: E3Z00000 Date: 03/29/97 From: DEREK STEEL Time: 02:25pm \/To: ALEX SADOVSKY (Read 0 times) Subj: CPS during connect U-1496E+ v 6.16 and U14:25:4203/29/97 Nude Greetings Alex, 22 Mar 97 10:39, Alex Sadovsky wrote to All: AS> ࠤ ᭮ ⢮ 롪, All! AS> What is avegare CPS when connecting my Zyxel U-1496E+ (v.6.16) and AS> U-1496 on bad quality lines? I have near 100..400 CPS. Is it ok? The lowest connect speed that i have had is with vfc modem (28.8) sometimes 2400 or 240 cps.... but otherwise the normal connect speeds of 1600 - 1650 cps or 1900 - 2000 cps with another zyxel 1496E+ AS> I have tried to change transmit level (*pn, where n was from 4 to AS> 14), connect protocol (&nx; &n17, &n42..&n46, etc.), control level AS> (at&kn) and some other options. The best speed have achieved with AS> at&n42*p5, but even in this case connect speed usually 4800 or 7200 AS> and CPS 100..400. AS> P.S. AS> Is this conference allows only English? AS> Moderator, can I see rules? AS> ! ᪨ ᠭ. AS> -+- , ஦! 뢠... ਭ ૨ AS> + Origin: , 쪮, ࠨ (2:461/19.11) Yours in the buff, Derek --- GoldED/2 2.50+ 6695OS3 * Origin: The Nude Dude BBS (1:153/7021)