--------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5E00006 Date: 05/09/97 From: FRANK RAMSEY Time: 09:41pm \/To: JEROEN FEDDEMA (Read 4 times) Subj: Re: File count on Netware 3.12 server JF> Hi all, JF> I'm having some problems with my backup; it doesn't back JF> up all files on the Netware 3.12 servers. I have a few JF> servers containing over 90,000 files per volume, and I JF> want to know how many files and directories there are JF> precisely on the server. In that way I can compare the JF> numbers the backup-program reports to the real numbers. JF> DOS 6.22 DIR, Norton Utilities and TREE-variants fail JF> here; they don't seem to count as far as 90,000 files. JF> Does anyone know a tool to count this number of files on a volume? SRCH will, reports the number of files, the actual space consumed and the space reserved. I got it from Netwire. framsey@goodyear.com; frank.ramsey@fallsbbs.com - CNE, CNA-4, PE --- EZPoint V2.2 * Origin: -- A Point on Pine Lake (330)-796-3146 -- (1:157/603.70) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5E00007 Date: 05/09/97 From: FRANK RAMSEY Time: 09:42pm \/To: VYACHESLAV REDKA (Read 4 times) Subj: Re: Long Name support for NW 3.12 and Wi21:42:1105/09/97 VR> Hi, All !;) VR> Subj ! Add OS2 name space to the volume. For 3.11, you must also add some patches and NLM's. Just adding the OS2 name space isn't enough. framsey@goodyear.com; frank.ramsey@fallsbbs.com - CNE, CNA-4, PE --- EZPoint V2.2 * Origin: -- A Point on Pine Lake (330)-796-3146 -- (1:157/603.70) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5E00008 Date: 05/10/97 From: JOHN TSERKEZIS Time: 12:22am \/To: ALL (Read 4 times) Subj: Utilization logger. Hi everyone, I was wondering if there is some type of data logger that logs server utilization.. I need to keep track of utilization over a period of a week or so. I don't need anything fancy, just the overall utilization percentage will . Oh, netware 3.12 server.. And prefer freeware, shareware public domain etc, as this will only be used for the week and not again, so it may not warrant cost of purchase of software. Thanks in advance. John Tserkezis, Sydney, Oz. Fidonet: 3:712/610 Internet: jt@suburbia.com.au ... I have a Mickey Mouse PC, Goofy operating system & a Banksia modem. --- * Origin: Technician Syndrome (3:712/610) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5E00009 Date: 05/10/97 From: IGOR MYNKIN Time: 11:08am \/To: MUFUTAU TOWOBOLA (Read 5 times) Subj: Timer Sync Hello Mufutau! ⢥ 08 1997, Mufutau Towobola writes to Igor Mynkin: IM> CM>> That should happen automatically when you log on. IM>> But it doesn't happen if you use Microsoft client for Novell IM>> networks. IM>> Only Novell 32bit client is OK. MT> Then Igor, how do you do that when using Micorsoft Client for MT> Networks? I need to know because that is what I am using. Thanks. I found no way to do it automatically. But if you really need it - then you can just sometimes execute DOS login.exe in DOS window. 㢠, Igor --- * Origin: EuroSib, Novosibirsk, Russia (2:5000/26.19) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5E00010 Date: 05/07/97 From: ROBIN KELLY Time: 10:35am \/To: ALL (Read 4 times) Subj: 3.11 Fax Server? Hello All ! Does anyone have experience with any Fax Server product suitable for Netware 3.11. If so, comments regarding abilities, limitations, known bugs. Praise and or caveats, etc. appreciated. CU L8 R, - Robin robin.kelly@nest.conchbbs.com --- timEd/386 1.10 * Origin: Robin's Nest\RBBS-PC (713) 526-8975 22:00-06:30 CDT (1:106/147) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5F00000 Date: 05/11/97 From: ARTHUR MARSH Time: 02:27am \/To: ALL (Read 4 times) Subj: C32DW - NW 3.12 file lock timeout Hi, I had to do a remote hardware reset of a machine running C32/DOS, whilst the machine had some files open. When the machine rebooted, it paused due to a file already being open from before the reboot. When I reached the machine an hour later, I only had to hit the R key for retry in response to the red C32 screen for things to proceed normally. What controls the timeout of the file lock on a client machine that has been shut down, and how can it be adjusted? --- TMail v1.31.5 * Origin: Common Ground (21 lines - 9600) Tel +61-8-8223-2131 (3:800/816) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5F00001 Date: 05/09/97 From: CASPER PEDERSEN Time: 07:01pm \/To: SOEREN HEDEMAND (Read 4 times) Subj: Re: Secondary ISA controller in 3.11 ser19:01:2405/09/97 Hi Soeren Thursday May 08 1997, Soeren Hedemand writes to All: SH> I'm trying to install an ESDI disk in my Novell 3.11 server. If I configure SH> the controller for I/O 1F0h and IRQ 14 and install it in the CMOS it works, SH> but when I set it up for I/O 170 and IRQ 15 ISADISK.DSK won't touch it, SH> probably because it can't detect the geometry of the disk. What do I do? (I SH> know there's nothing wrong hardware-wize, because it works under OS/2.) Get CDUP4(5).EXE (support.novell.com), and load ideata.ham: load ideata.ham port=170 int=F load idehd.cdm Greetings Casper (casper.pedersen@ld.dk) --- GoldED 2.50+ * Origin: Dumbo RAP - Disse rer, gr mig skr.. 86426652(V.34) (2:238/210.16) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5F00002 Date: 04/30/97 From: RICHARD PEER Time: 06:08pm \/To: STEVE SORENSON (Read 4 times) Subj: Client based NW 3.12 backup? In a message of <29 Apr 1997 05:37>, Steve Sorenson (1:282/3020) writes: SS>I've looked at Novaback, Seagate Backup Exec, Arcserve, Stac's SS>Replica, and everyone requires a server based setup with an NLM SS>being loaded. Novaback do several versions, including a DOS based and an OS/2 based system. I would imagine that they also have a win95 version as well. The NLM version is not the only Novaback version. I use the DOS and OS/2 versions here and they both know about the bindery and directory and file trusteeships. I have more than once restored a complete server from a DOS based backup using Novaback. Regards, Richard. --- Msged/Q 1.60 * Origin: Sysop "Novell User Group of SA" Pta, RSA (5:7106/22) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5F00003 Date: 05/04/97 From: RICHARD PEER Time: 07:43am \/To: FRANK RAMSEY (Read 4 times) Subj: Re: Client based NW 3.12 back In a message of <02 May 1997 20:29>, Frank Ramsey (1:157/603.70) writes: FR>A number of the workstation packages understand Netware file FR>structures. FR>PC Backup, for example, can save the bindery and trusteeships. FR>So can Ultra Tape and many others. The only caveat that I know of is that the workstation concerned must be logged in as supervisor or equivalent. Regards, Richard. --- Msged/Q 1.60 * Origin: Sysop "Novell User Group of SA" Pta, RSA (5:7106/22) --------------- FIDO MESSAGE AREA==> TOPIC: 194 NOVELL Ref: E5G00000 Date: 05/12/97 From: ARTHUR MARSH Time: 04:55am \/To: FRANK RAMSEY (Read 4 times) Subj: Re: Syncing time with a timeserver On Fri 09 May at 21:36 Frank Ramsey (1:157/603.70) wrote to Jonathan Hunter: FR> There is one. Believe it's called RDATE. We use it to sync FR> our 4.x environment to the Internet. Then another tool to FR> sync the 3.x servers to 4.x, gaining automagic day light FR> savings time advances, fallbacks. FR> RDATE works on 3.x also. I've never been able to figure out how to set the timezone on a NW 3.12 machine so that RDATE can get our local time (UTC +9:30) correct. Instead, I have a program running on the UnixWare 1.1.2 machine (running NTP) set the time on the NW 3.12 machine. --- msgedsq 2.1 * Origin: Camelot Swamp MJCNA, Hawthorndene, Sth Australia (3:800/812)