--------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGG00000 Date: 12/09/96 From: DIMITRI VAN HOVEN Time: 11:34pm \/To: JERRY SCHWARTZ (Read 1 times) Subj: E2864 1.14 firmware Hello Jerry! Saturday December 07 1996 13:27, Jerry Schwartz wrote to Lennart Einarsson: JS> I found 1.14 on the web site again on December 6. I haven't tried it JS> yet. I have seen him to. But it's the same number so i think it's the same 1.14! Best Regards, -=*Dimitri*=- diho@pi.net diho%milieu.biochem@m_mil.biochem.nl ... "Unbelievable! We thought you were a goner!" - Frohicke to Mulder --- FD 2.12/Fastecho 1.45a/Golded * Origin: ZyXEL -=More Than A Modem=- (2:281/631.7) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGG00001 Date: 12/10/96 From: ALESSANDRO DEMANZANO Time: 02:54am \/To: JERRY SCHWARTZ (Read 1 times) Subj: E2864 1.14 firmware Hi Jerry! Sabato 07 Dicembre 1996, Jerry Schwartz write to Lennart Einarsson about E2864 1.14 firmware: JS> I found 1.14 on the web site again on December 6. I haven't tried it yet. it's enough stable, also if not really perfect.. ;))... however check at ftp.sidin.it/pub/zyxel (and then follows dir names for your modem (1496, 2864, 288, ISDN, analog, ecc.) i.e., I've found the 2.04A and 2.04B ISDN not visibile from their web pages it's a very often updates site :-) bye! Ale ale@eureka.est.it --- Xenia/2 on WarpStation * Origin: The SunShine/2 BBS 02-3490912 (2:331/341) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGG00002 Date: 12/10/96 From: LENNART EINARSSON Time: 11:32am \/To: JERRY SCHWARTZ (Read 1 times) Subj: Re: E2864 1.14 firmware EW>>> Hope v1.15 will be a real UPDATE again... DvH>> I heart it will be 1.14a! LE> Question is only, when? JS> I found 1.14 on the web site again on December 6. I haven't tried it JS> yet. Funny, I wonder if they done something to it, or in it. A lot of folks got problems with dropping carriers when I used 1.14. For my self, I notice a slight improvident in the speed. :-) /Lempa, E-Post: dioden@topazen.hammar.pp.se --- EzyBlueWave V1.48b3 00f90059 * Origin: Not tonight dear, I'm playing with my Elite (2:201/2129) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGI00000 Date: 12/12/96 From: JERRY SCHWARTZ Time: 07:46pm \/To: LENNART EINARSSON (Read 1 times) Subj: E2864 1.14 firmware [Dec 10, 96 - 11:32] Lennart Einarsson of 2:201/2129 wrote to Jerry Schwartz: JS>> I found 1.14 on the web site again on December 6. I haven't tried it JS>> yet. LE> Funny, I wonder if they done something to it, or in it. A lot of folks LE> got problems with dropping carriers when I used 1.14. For my self, I LE> notice a slight improvident in the speed. :-) I have been running it for a few days, but our weather has been terrible. A lot of wires came down, and anything that could be wet, is wet, so I can't really say anything about how well it works. It doesn't seem worse than 1.13b, which I had before. Jerry Schwartz --- Msged/386 4.00 * Origin: Write by Night (1:142/928) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGI00001 Date: 12/12/96 From: JEAN FIEVEZ Time: 08:59pm \/To: DIMITRI VAN HOVEN (Read 1 times) Subj: Question! Hello Dimitri! Le Dimanche 08 Dcembre 1996 Dimitri van Hoven crivait All : DvH> I have an BBS running with Frontdoor 2.12 en a ZyXEL Elite 2864 analog DvH> modem. DvH> I understand that the modem can receive faxes en print these directly o DvH> a printer with is connected to the modems Parallel port. DvH> I use the following settings in Frontdoor: DvH> AT+FCLASS=Z DvH> Causes the modem to use ZyXEL class fax protocol. If you use the ZyXEL modem, you must have received also the ZFax program (v4.02 with Elite 2864). With FrontDoor, and after you have indicated the profile one FAX: Internal 'Yes', you putting the following commands in your FD init strings: ATZ|~AT#B1+FCLASS=6| You will be able to dices during sending and also receive some Fax by automatic detection of FrontDoor and work your Fax (conversion, print, etc.) with ZFax. Do I hope to you could have helped? Best Regards, _ _/ean ivez --- GoldED 2.50+ * Origin: Space Software BBS Durbuy (B) 32-(0)86-213030 Reply-> (2:293/3901) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGI00002 Date: 12/08/96 From: THIERRY BLANCHOT Time: 09:31am \/To: JEFF GRAY (Read 3 times) Subj: RE: Upgrade >It's been years since I lurked around here, but I now have a question. >I have a 1496E and would like to upgrade it to 28.8. I live in >Vancouver, Canada. Who should I contact? I'd prefer to make my initial >inquiries via the internet. Many thanks. This is unfortunately not possible... Thierry. * PowerEdit 2.5 Don't pick up that phon9 NO CARRIER --- FidoPCB v1.5 beta-'j' * Origin: Music Power BBS! - (33) 03.88.83.63.59 - (2:325/42) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGK00000 Date: 12/13/96 From: RICHARD TOWN Time: 12:18pm \/To: BOB JUGE (Read 0 times) Subj: 28k8 vs 33k6 -=> Quoting Bob Juge to Joe Schweier <=- BJ> Try to convince Rockwell, who had to offer a hardware (chipset) BJ> upgrade to go from 28.8kbps to 33.6kbps. Supra didn't. Nor did Cardinal or Boca, nor Zoom with their PCMCIA V34c rgdZ Richard ... well behind with my mail :( --- FMail/386 1.02 * Origin: PackLink - Home of Zoom_Modem +441812972486 (2:254/235) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGK00001 Date: 12/16/96 From: CRAIG FORD Time: 03:29am \/To: RICHARD TOWN (Read 0 times) Subj: 28k8 vs 33k6 Richard Town wrote the following to Bob Juge, and I quote (in part): BJ> Try to convince Rockwell, who had to offer a hardware (chipset) BJ> upgrade to go from 28.8kbps to 33.6kbps. RT> Supra didn't. Nor did Cardinal or Boca, nor Zoom with their PCMCIA RT> V34c Irrespective of the OEM, - EVERY - modem using Rockwell's Rev 04 datapump required an upgade to go from 28.8 to 33.6Kbps. Regards.... Craig aka: cford@ix.netcom.com : craig.ford@f2001.n106.z1.conchbbs.com --- timEd/2 1.10+ * Origin: Dayze of Futures Past * V.Everything * 281-458-0237 * (1:106/2001) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGK00002 Date: 12/16/96 From: BOB JUGE Time: 08:38am \/To: RICHARD TOWN (Read 0 times) Subj: 28k8 vs 33k6 Richard Town wrote in a message to Bob Juge: -=> Quoting Bob Juge to Joe Schweier <=- BJ> Try to convince Rockwell, who had to offer a hardware (chipset) BJ> upgrade to go from 28.8kbps to 33.6kbps. RT> Supra didn't. Nor did Cardinal or Boca, nor Zoom with their PCMCIA RT> V34c I'm referring to those Rockwell v.34 chipsets that were available during the time when USR first implemented v.34+, not the later ones. - Bob Internet : bob@juge.com Telnet, Vmodem, WWW or FTP to juge.com --- timEd/2 1.10+ * Origin: COMM Port OS/2 juge.com 204.89.247.1 (281) 980-9671 (1:106/2000) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: DGL00000 Date: 12/16/96 From: LENNART EINARSSON Time: 11:58pm \/To: JERRY SCHWARTZ (Read 0 times) Subj: Re: E2864 1.14 firmware LE> Funny, I wonder if they done something to it, or in it. A lot of folks LE> got problems with dropping carriers when I used 1.14. For my self, I LE> notice a slight improvident in the speed. :-) JS> I have been running it for a few days, but our weather has been JS> terrible. A lot of wires came down, and anything that could be wet, JS> is wet, so I can't really say anything about how well it works. It JS> doesn't seem worse than 1.13b, which I had before. 1.13b? I have gone back to 1.13, but I haven't seen any 1.13b, well. I think I just wait a while to se what's popping up. I might convert to ISDN sometimes under next year. .. /Lempa, E-Post: dioden@topazen.hammar.pp.se --- EzyBlueWave V1.48g0 00f90059 * Origin: Not tonight dear, I'm playing with my Elite (2:201/2129)