------------------------------------------------
DEVICE=X00.SYS E DV F=14 B,1,115200
IMSETUP -> Modem -> Advanced setup -> Hardware
----------------------------------------------
Modem port                      2
Maximum baud rate               115200
Lock port                       Yes
Reset modem to connect speed    No 
Lower DTR when busy             No
Lower DTR to terminate call     Yes
Toggle DTR before dialing       No
IMSETUP -> Modem -> Advanced setup -> Command strings
-----------------------------------------------------
Escape code    +++
Return on-line ~ATO|
Onhook         ATH0|
Offhook        ~ATM0H1|
Dial           ATDT
  Prefix
  Suffix       |
Delay          3
Init-1         ATZ|
Init-2         AT#B1+FCLASS=6|
Init-3
Down           ~ATM0H1|
Reset          AT|
IMSETUP -> Modem -> Advanced setup -> Answer control
----------------------------------------------------
Manual answer  Yes
Force answer   ATA|
Answer delay   6
Answer on ring 1
IMSETUP -> Modem -> Advanced setup -> Connect strings
-----------------------------------------------------
 #    Connect Message            Speed   EC   BBSexit   Terminate
11    CONNECT FAX                14400   Y    0         249
MAILER BATCHFILE (RUNIM_DV.BAT)
-------------------------------
 :start
@echo off
c:
cd \im
im %1 %2 %3 %4 %5
if errorlevel 250 goto bbscall
if errorlevel 249 goto fax
 :bbscall
dobbs
 
 :fax
doconn
DOCONN.BAT (Created by IM with each connect)
-------------------------------------------
EXECONN 14400 2 722 / 1
EXECONN.BAT (I use ZFAX v3.12 with the E2864)
-----------
@echo off
c:
cd \zfax312
REM - the next call "wait 20" injects a 2 second pause
REM - Wait is freeware available from the IM Support BBS
wait 20
zfax rf
REM - ZFAX is configured to automatically print received FAX
if errorlevel 0 goto MESSAGE
goto end
 
 :MESSAGE
REM - This sends me a Netmail message and makes MAIL semafore flash
cd c:\im
REM - Everything between here and "goto end" is one line
imsend m "FAX Received" 1:280/32 /a"Mike Poston" /o"ZFAX and InterMail" 
/t=c:\im\recfax.txt /s=ci
goto end
 :END
cd c:\ra
REM - This puts "Inbound FAX" as the last caller on IM's screen
lastuser #1 FAX /History
cd c:\im
runim_dv.bat
Mike 
--- 
 * Origin: The Sounding Board - KCMO (1:280/32)
---------------

FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS  Ref: CEQ00019 Date: 10/16/95
From: MIKE POSTON                                           Time: 11:10pm
\/To: MARK OTT                                            (Read 2 times)
Subj: FAX Doesn't WORK!

** Quoting Mark Ott in a message to Andy Millon
** Originally posted Oct 16, 1995:
 AM> Reference: 2864 Series Modem User's Manual,
 AM>              Fax reception from within a BBS system,
 AM>                Setup change #4,
 AM>                  page 15-18,
 MO>     What model 2864 do you have? Mine is not ISDN and I only
 MO> got a "ELITE 2864 Quick Start Guide" manual and does not
 MO> have the refrences that you are writting about in it
 MO> anywhere.
Mark, this is from the Adobe Acrobat format textfile manual - available from 
the ZyXEL BBS (it's HUGE - grab the reader program too or it's useless).
However:
 AM>   This reference indicates the most probable command line to be:
 AM>               rcvfax 2 /p:comport  [/w:workpath].
ZFAX 4.0x comes with ONE executable file: ZFAX.COM. Kinda' hard to pass 
params to vaporware, eh? <g> I think this to be a glaring carry-over from 
_really_ old documentation. To see available commandline params for ZFAX, 
type ZFAX /?
Mike 
--- 
 * Origin: The Sounding Board - KCMO (1:280/32)
---------------

FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS  Ref: CEQ00020 Date: 10/20/95
From: RICK KIRKSEY                                          Time: 06:16pm
\/To: BRENT SMITH                                         (Read 2 times)
Subj: Zyxel 2864i

RE: Zyxel 2864i
BY: Brent Smith to All on Thu Oct 19 1995 00:05:57
 > Is there a upgrade package for the u-1496e+ to go to the new 28800 modems?
     The option to do so was supposed to end 9/31. You might call them and 
ee
if they will honor your request. But don't be in a hurry to get it. They have
been back ordered.
     Have a great day,
     Rick
--- Synchronet+SBBSecho v1.20
 * Origin: Born to be Wild BBS  KCMO  816.461.6267  ZyXEL (1:280/157)
---------------

FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS  Ref: CER00000 Date: 10/20/95
From: JERRY SCHWARTZ                                        Time: 05:50pm
\/To: TYRONE HORTON                                       (Read 3 times)
Subj: Mailer and Zfax 4.x

On Oct 19 16:36 95, Tyrone Horton of 1:103/725 wrote to All:
TH> If you are going to use Zfax 4.0 or above with a mailer, you must lock
TH> your port speed at 115.2kbps. Zfax 4.0 an above uses a port speed of
TH> 115.2kbps.
Exclusively?
Jerry Schwartz
--- MsgedsqB 3.20.01
 * Origin: Write by Night (1:142/928)