--------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4Q00000 Date: 04/19/95 From: SANDER BOEKEE Time: 06:38am \/To: UDO VAN DEN HEUVEL (Read 5 times) Subj: FAX receive with Warp? Hello Udo! 14 Apr 95 21:15, Udo van den Heuvel wrote to All: UvdH> I am looking for software to receive faxes in combination with UvdH> MainDoor/2 (running under OS/2 3.0 ('Warp')). Currently (MS-DOS) I use UvdH> RCVFAX.COM but I'd like to have native OS/2 software to do the job. Why don't you use Faxworks ? It comes with the bonus pack ! Sander --- Wait till I'm there! * Origin: QuaZie-Net is allright (2:2802/182) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4Q00001 Date: 04/20/95 From: ROELAND JANSEN Time: 02:58pm \/To: GREG MCCARTHY (Read 5 times) Subj: Ping > Thanks. Its kinda strange though, I've looked thru most of > the overseas mags and never come across a Zyxel advert. at least the BYTE has had several advertisements (or it was dr-dobbs ?) but then... what's overseas. the USA or eurpoe for instance :-) --- FastEcho v1.42b8+ * Origin: [PC-MOS/386 operating system support] (2:2802/105.1) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4Q00002 Date: 04/20/95 From: EVANS ROUSSOS Time: 03:48pm \/To: ALL (Read 5 times) Subj: 19.2 to 28.8 upgrade I would like to know if i can upgrade my 1496E+ to new 28.8 ? How i can do it and what's the cost ? Evans --- GED / Bink / GEcho / PB * Origin: SysCOM BBS Closed Board * Athens * 19k2bps/ZyXEL (2:410/118) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4Q00003 Date: 04/20/95 From: SANDER BOEKEE Time: 02:48pm \/To: GRAHAM ADAM (Read 5 times) Subj: ???????? Hello Graham! 14 Apr 95 06:00, Graham Adam wrote to All: GA> This forum appears to be like Zyxel, no action or am I not getting the GA> mail This is a very empty echo, probably will change when the new model is released ! Sander --- Wait till I'm there! * Origin: QuaZie-Net is allright (2:2802/182) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4Q00004 Date: 04/20/95 From: BILL BARBER Time: 11:55pm \/To: ALL (Read 5 times) Subj: Fax Problems I am having problems with receiving faxes with some older Fax machines. With my old EPROM version 5.05 I had no problems. Now that I have upgraded to .14, the problem has developed. I can send to these fax machines fine. When I receive, there is a connect, but then when there is an attempt to adjust speed the line is disconnected. They get a message 115 "line error". The machine is a XEROX model 7009. I get an error message -6005 "Failed to hang up the Phone correctly". I saw one message that there was a problem with S35. The init that I am using with the Fax software is AT&K4&D2V1S40=16E. This comes from the recommendations from FAX stf 2.6.1 for pn2388 Class 2. My settings are: AT&K4&D2V1S40=16E OK Current Settings............ B0 E0 L1 M1 N1 Q0 V1 X5 &B1 &C1 &D2 &G0 &H3 &J0 &K4 &L0 &M0 &N0 &P0 &R1 &S0 &X0 &Y1 *B0 *C0 *D0 *E0 *F0 *G0 *I0 *L0 *M0 *P9 *Q2 *S0 S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=003 S07=060 S08=002 S09=006 S10=007 S11=050 S12=000 S13=000 S14=002 S15=130 S16=000 S17=018 S18=000 S19=000 S20=001 S21=178 S22=000 S23=104 S24=034 S25=000 S26=000 S27=156 S28=068 S29=000 S30=000 S31=017 S32=019 S33=255 S34=030 S35=032 S36=000 S37=000 S38=000 S39=032 S40=016 S41=000 S42=000 S43=008 S44=000 S45=100 S46=028 S47=064 S48=000 S49=006 S50=000 S51=000 S52=000 S53=000 S54=000 S55=000 S56=000 S57=000 S58=000 S59=000 Anyone know where the problem is? Thanks. -> Alice4Mac 2.4.4 E QWK Eval:19Jan95 --- RA 2.02 * Origin: Lava Rock 16.8K V32b ZyXel (905)566-8518 (1:259/438) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4R00000 Date: 04/20/95 From: KEITH HUNTINGTON Time: 09:36pm \/To: SANDER BOEKEE (Read 5 times) Subj: FAX receive with Warp? On Wednesday April 19 1995, Sander Boekee wrote to Udo van den Heuvel: UvdH>> I am looking for software to receive faxes in combination with UvdH>> MainDoor/2 (running under OS/2 3.0 ('Warp')). Currently UvdH>> (MS-DOS) I use RCVFAX.COM but I'd like to have native OS/2 UvdH>> software to do the job. SB> Why don't you use Faxworks ? It comes with the bonus pack ! Care to tell us all how you'd get faxworks to take over a call when the mailer detects an incoming fax? (Hint: FxRCV.EXE -CC reinitiallizes the modem before it takes a call -- which means it will make the modem hang up.) --- *KJH* * Origin: The Janitor's Closet [Psychotronic BBS] (1:3641/1.222) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4S00000 Date: 04/20/95 From: UDO VAN DEN HEUVEL Time: 07:21pm \/To: ALL (Read 5 times) Subj: view fax with OS/2? Hello All! Does anybody have a native OS/2-program to view the faxes my system received with REFAX2.EXE (great RCVFAX.COM replacement!)? Greetz, Udo --- * Origin: Mja, ff geen goeie origin... (2:285/307.9) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4V00000 Date: 04/22/95 From: CHUMA AGBODIKE Time: 01:16am \/To: VINCENT HAULOTTE (Read 5 times) Subj: How do I ? On Apr/18/95, Vincent Haulotte of 2:291/712.160 wrote: VH> Hello Chuma, VH> Wednesday April 05 1995, Chuma Agbodike writes to All: CA>> I pickup echomail from a node that uses a 28.8 K modem. I use a ZYXEL CA>> 1496E that can do 14.4 K. CA>> Problem is several times I can connect only at 2400 with the node. Once CA>> in a while we connect at 14.4 K VH> I've the same problems with the majority of 28k8 modem here, I have to VH> make these two command to be sure to connect at 14k4 with these modem VH> AT&N17 VH> ATS19=17 VH> Sometime only the first is suffisant, but not always ... Merci Vincent. I used to live on Chausee d'Ixelles near port de namur. I have opted to use ModemTrans method in my nodelist processor. I also plan purchase ISDN hardware as soon as the dust settles. Well maybe in 3 months. In the meantime I am looking for someone to burn new ROM for my 1496E. So far the modem connects at 14.4K with the node I mentioned. en chante Chuma --- Msgedsq 2.2e * Origin: Third World, Chatsworth, Ca. (818) 700-9591 (1:102/803) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4V00001 Date: 04/24/95 From: LARS S. ANDERSEN Time: 12:41pm \/To: ALL (Read 5 times) Subj: FAX commands Hallo All !! I'm using GPfax on an Amiga, and I have some trouble with the settings, The modem is of coaurse a Zyxel U-1496. The problem is that I don't know how to send a fax in the program. When I tray to send a fax, it jumps out of dealing mode and in to delay mode, where it count down from 30 sec. What command shall I use, and what difference is there between Pulse and Tone. Greatings Lars S. Andersen --- Spot 1.2d Unregistered * Origin: -+- Spot -+- (2:237/38.4) --------------- FIDO MESSAGE AREA==> TOPIC: 116 ZYXEL MODEMS Ref: C4V00002 Date: 04/24/95 From: JESPER NICK JRGENSEN Time: 12:41pm \/To: SERGE PAVLOV (Read 5 times) Subj: Up 2 date Hello Serge! Onsdag April 12 1995 10:53, Serge Pavlov wrote to Jesper Nick Jrgensen: JNJ>>> What is the most recent release version of: JNJ>>> __ ZYXEL 1496 firmware MS>> 6.14 SP> What is the version: SP> U1496E V 20795 P ? Looks like your firmware (hopefully) needs to be changed. It should read: U1496E V 6.14 P Jesper --- GEcho 1.00 * Origin: Team VGC Danmark Point 55 (2:235/90.55)